Contents Of PNaCl Bitcode Files

Warning

Deprecation of the technologies described here has been announced for platforms other than ChromeOS.

Please visit our migration guide for details.


Introduction

This document is a reference manual for the contents of PNaCl bitcode files. We define bitcode files via three layers. The first layer is presented using assembly language PNaClAsm, and defines the textual form of the bitcode file. The textual form is then lowered to a sequence of PNaCl records. The final layer applies abbreviations that convert each PNaCl record into a corresponding sequence of bits.

/native-client/images/PNaClBitcodeFlow.png

PNaClAsm uses a static single assignment (SSA) based representation that requires generated results to have a single (assignment) source.

PNaClAsm focuses on the semantic content of the file, not the bit-encoding of that content. However, it does provide annotations that allow one to specify how the abbreviations are used to convert PNaCl records into the sequence of bits.

Each construct in PNaClAsm defines a corresponding PNaCl record. A PNaCl bitcode file is simply a sequence of PNaCl records. The goal of PNaClAsm is to make records easier to read, and not to define a high-level user programming language.

PNaCl records are an abstract encoding of structured data, similar to XML. Like XML, A PNaCl record has a notion of a tag (i.e. the first element in a record, called a code). PNaCl records can be nested. Nesting is defined by a corresponding enter and exit block record.

These block records must be used like balanced parentheses to define the block structure that is imposed on top of records. Each exit record must be preceded by a corresponding enter record. Blocks can be nested by nesting enter/exit records appropriately.

The PNaCl bitcode writer takes the sequence of records, defined by a PNaClAsm program, and converts each record into a (variable-length) sequence of bits. The output of each bit sequence is appended together. The resulting generated sequence of bits is the contents of the PNaCl bitcode file.

For every kind of record, there is a method for converting records into bit sequences. These methods correspond to a notion of abbreviations. Each abbreviation defines a specific bit sequence conversion to be applied.

Abbreviations can be user-defined, but there are also predefined defaults. All user-specified abbreviations are included in the generated bitcode file. Predefined defaults are not.

Each abbreviation defines how a record is converted to a bit sequence. The PNaCl translator uses these abbreviations to convert the bit sequence back to the corresponding sequence of PNaCl records. As a result, all records have an abbreviation (user or default) associated with them.

Conceptually, abbreviations are used to define how to pack the contents of records into bit sequences. The main reason for defining abbreviations is to save space. The default abbreviations are simplistic and are intended to handle all possible records. The default abbreviations do not really worry about being efficient, in terms of the number of bits generated.

By separating the concepts of PNaCl records and abbreviations, the notion of data compression is cleanly separated from semantic content. This allows different use cases to decide how much effort should be spent on compressing records.

For a JIT compiler that produces bitcode, little (if any) compression should be applied. In fact, the API to the JIT may just be the records themselves. The goal of a JIT is to perform the final translation to machine code as quickly as possible.

On the other hand, when delivering across the web, one may want to compress the sequence of bits considerably, to reduce costs in delivering web pages. Note that pnacl-compress is provided as part of the SDK to do this job.

Data Model

The data model for PNaCl bitcode is fixed at little-endian ILP32: pointers are 32 bits in size. 64-bit integer types are also supported natively via the i64 type (for example, a front-end can generate these from the C/C++ type long long).

Integers are assumed to be modeled using two’s complement. Floating point support is fixed at IEEE 754 32-bit and 64-bit values (float and double, respectively).

PNaCl Blocks

Blocks are used to organize records in the bitcode file. The kinds of blocks defined in PNaClAsm are:

Module block
A top-level block defining the program. The module block defines global information used by the program, followed by function blocks defining the implementation of functions within the program. All other blocks (listed below) must appear within a module block.
Types block
The types block defines the set of types used by the program. All types used in the program must be defined in the types block. These types consist of primitive types as well as high level constructs such as vectors and function signatures.
Globals block
The globals block defines the set of addresses of global variables and constants used by the program. It also defines how each global (associated with the global address) is initialized.
Valuesymtab block
The valuesymtab block defines textual names for external function addresses.
Function block
Each function (implemented) in a program has its own function block that defines the implementation of the corresponding function.
Constants block
Each implemented function that uses constants in its instructions defines a constants block. Constants blocks appear within the corresponding function block of the implemented function.
Abbreviations block
Defines global abbreviations that are used to compress PNaCl records. The abbreviations block is segmented into multiple sections, one section for each kind of block. This block appears at the beginning of the module block.

This section is only intended as a high-level discussion of blocks. Later sections will dive more deeply into the constraints on how blocks must be laid out. This section only presents the overall concepts of what kinds of data are stored in each of the blocks.

A PNaCl program consists of a header record and a module block. The header record defines a sequence of bytes uniquely identifying the file as a bitcode file. The module block defines the program to run.

Each block, within a bitcode file, defines values. These values are associated with IDs. Each type of block defines different kinds of IDs. The module, types, globals, and abbreviations blocks define global identifiers, and only a single instance can appear. The function and constant blocks define local identifiers, and can have multiple instances (one for each implemented function).

The only records in the module block that define values, are function address records. Each function address record defines a different function address, and the type signature associated with that function address.

Each function block defines the implementation of a single function. Each function block defines the intermediate representation of the function, consisting of basic blocks and instructions. If constants are used within instructions, they are defined in a constants block, nested within the corresponding function block.

All function blocks are associated with a corresponding function address. This association is positional rather than explicit. That is, the Nth function block in a module block corresponds to the Nth defining (rather than declared) function address record in the module block.

Hence, within a function block, there is no explicit reference to the function address the block defines. For readability, PNaClAsm uses the corresponding function signature, associated with the corresponding function address record, even though that data does not appear in the corresponding records.

PNaCl Records

A PNaCl record is a non-empty sequence of unsigned, 64-bit, integers. A record is identified by the record code, which is the first element in the sequence. Record codes are unique within a specific kind of block, but are not necessarily unique across different kinds of blocks. The record code acts as the variant discriminator (i.e. tag) within a block, to identify what kind of record it is.

Record codes that are local to a specific kind of block are small values (starting from zero). In an ideal world, they would be a consecutive sequence of integers, starting at zero. However, the reality is that PNaCl records evolved over time (and actually started as LLVM records). For backward compatibility, obsolete numbers have not been reused, leaving gaps in the actual record code values used.

Global record codes are record codes that have the same meaning in multiple kinds of blocks. To separate global record codes from local record codes, large values are used. Currently there are four global record codes. To make these cases clear, and to leave ample room for future growth in PNaClAsm, these special records have record codes close to the value 216. Note: Well-formed PNaCl bitcode files do not have record codes >= 216.

A PNaCl record is denoted as follows:

a: <v0, v1, ... , vN>

The value v0 is the record code. The remaining values, v1 through vN, are parameters that fill in additional information needed by the construct it represents. All records must have a record code. Hence, empty PNaCl records are not allowed. a is the index to the abbreviation used to convert the record to a bit sequence.

While most records (for a given record code) have the same length, it is not true of all record codes. Some record codes can have arbitrary length. In particular, function type signatures, call instructions, phi instructions, switch instructions, and global variable initialization records all have variable length. The expected length is predefined and part of the PNaClAsm language. See the corresponding construct (associated with the record) to determine the expected length.

The PNaCl bitstream writer, which converts records to bit sequences, does this by writing out the abbreviation index used to encode the record, followed by the contents of the record. The details of this are left to the section on abbreviations. However, at the record level, one important aspect of this appears in block enter records. These records must define how many bits are required to hold abbreviation indices associated with records of that block.

Default Abbreviations

There are 4 predefined (default) abbreviation indices, used as the default abbreviations for PNaCl records. They are:

0
Abbreviation index for the abbreviation used to bit-encode an exit block record.
1
Abbreviation index for the abbreviation used to bit-encode an enter block record.
2
Abbreviation index for the abbreviation used to bit-encode a user-defined abbreviation. Note: User-defined abbreviations are also encoded as records, and hence need an abbreviation index to bit-encode them.
3
Abbreviation index for the default abbreviation to bit-encode all other records in the bitcode file.

A block may, in addition, define a list of block specific, user-defined, abbreviations (of length U). The number of bits B specified for an enter record must be sufficiently large such that:

2**B >= U + 4

In addition, the upper limit for B is 16.

PNaClAsm requires specifying the number of bits needed to read abbreviations as part of the enter block record. This allows the PNaCl bitcode reader/writer to use the specified number of bits to encode abbreviation indices.

PNaCl Identifiers

A program is defined by a module block. Blocks can be nested within other blocks, including the module block. Each block defines a sequence of records.

Most of the records, within a block, also define unique values. Each unique value is given a corresponding unique identifier (i.e. ID). In PNaClAsm, each kind of block defines its own kind of identifiers. The names of these identifiers are defined by concatenating a prefix character ('@' or '%'), the kind of block (a single character), and a suffix index. The suffix index is defined by the positional location of the defined value within the records of the corresponding block. The indices are all zero based, meaning that the first defined value (within a block) is defined using index 0.

Identifiers are categorized into two types, local and global. Local identifiers are identifiers that are associated with the implementation of a single function. In that sense, they are local to the block they appear in.

All other identifiers are global, and can appear in multiple blocks. This split is intentional. Global identifiers are used by multiple functions, and therefore must be known in all function implementations. Local identifiers only apply to a single function, and can be reused between functions. The PNaCl translator uses this separation to parallelize the compilation of functions.

Note that local abbreviation identifiers are unique to the block they appear in. Global abbreviation identifiers are only unique to the block type they are defined for. Different block types can reuse global abbreviation identifiers.

Global identifiers use the prefix character '@' while local identifiers use the prefix character '%'.

Note that by using positional location to define identifiers (within a block), the values defined in PNaCl bitcode files need not be explicitly included in the bitcode file. Rather, they are inferred by the (ordered) position of the record in the block. This is also intentional. It is used to reduce the amount of data that must be (explicitly) passed to the PNaCl translator, when downloaded into Chrome.

In general, most of the records within blocks are assumed to be topologically sorted, putting value definitions before their uses. This implies that records do not need to encode data if they can deduce the corresponding information from their uses.

The most common use of this is that many instructions use the type of their operands to determine the type of the instruction. Again, this is intentional. It allows less information to be stored.

However, for function blocks (which define instructions), a topological sort may not exist. Loop carried value dependencies simply do not allow topologically sorting. To deal with this, function blocks have a notion of (instruction value) forward type declarations. These declarations must appear before any of the uses of that value, if the (instruction) value is defined later in the function than its first use.

The kinds of identifiers used in PNaClAsm are:

@a
Global abbreviation identifier.
%a
Local abbreviation identifier.
%b
Function basic block identifier.
%c
Function constant identifier.
@f
Global function address identifier.
@g
Global variable/constant address identifier.
%p
Function parameter identifier.
@t
Global type identifier.
%v
Value generated by an instruction in a function block.

Conventions For Describing Records

PNaClAsm is the textual representation of PNaCl records. Each PNaCl record is described by a corresponding PNaClAsm construct. These constructs are described using syntax rules, and semantics on how they are converted to records. Along with the rules, is a notion of global state. The global state is updated by syntax rules. The purpose of the global state is to track positional dependencies between records.

For each PNaCl construct, we define multiple sections. The Syntax section defines a syntax rule for the construct. The Record section defines the corresponding record associated with the syntax rule. The Semantics section describes the semantics associated with the record, in terms of data within the global state and the corresponding syntax. It also includes other high-level semantics, when appropriate.

The Constraints section (if present) defines any constraints associated with the construct, including the global state. The Updates section (if present) defines how the global state is updated when the construct is processed. The Examples section gives one or more examples of using the corresponding PNaClAsm construct.

Some semantics sections use functions to compute values. The meaning of functions can be found in support functions.

The syntax rule may include the abbreviation to use, when converting to a bit-sequence. These abbreviations, if allowed, are at the end of the construct, and enclosed in < and > brackets. These abbreviations are optional in the syntax, and can be omitted. If they are used, the abbreviation brackets are part of the actual syntax of the construct. If the abbreviation is omitted, the default abbreviation index is used. To make it clear that abbreviations are optional, syntax rules separate abbreviations using plenty of whitespace.

Within a syntax rule, lower case characters are literal values. Sequences of upper case alphanumeric characters are named values. If we mix lower and upper case letters within a name appearing in a syntax rule, the lower case letters are literal while the upper case sequence of alphanumeric characters denote rule specific values. The valid values for each of these names will be defined in the corresponding semantics and constraints subsections.

For example, consider the following syntax rule:

%vN = add T O1, O2;                            <A>

This rule defines a PNaClAsm add instruction. This construct defines an instruction that adds two values (O1 and O2) to generate instruction value %vN. The types of the arguments, and the result, are all of type T. If abbreviation ID A is present, the record is encoded using that abbreviation. Otherwise the corresponding default abbreviation index is used.

To be concrete, the syntactic rule above defines the structure of the following PNaClAsm examples:

%v10 = add i32 %v1, %v2;  <@a5>
%v11 = add i32 %v10, %v3;

In addition to specifying the syntax, each syntax rule can also also specify the contents of the corresponding record in the corresponding record subsection. In simple cases, the elements of the corresponding record are predefined (literal) constants. Otherwise the record element is an identifier from another subsection associated with the construct.

Factorial Example

This section provides a simple example of a PNaCl bitcode file. Its contents describe a bitcode file that only defines a function to compute the factorial value of a number.

In C, the factorial function can be defined as:

int fact(int n) {
  if (n == 1) return 1;
  return n * fact(n-1);
}

Compiling this into a PNaCl bitcode file, and dumping out its contents with utility pnacl-bcdis, the corresponding output is:

  0:0|<65532, 80, 69, 88, 69, 1, 0,|Magic Number: 'PEXE' (80, 69, 88, 69)
     | 8, 0, 17, 0, 4, 0, 2, 0, 0, |PNaCl Version: 2
     | 0>                          |
 16:0|1: <65535, 8, 2>             |module {  // BlockID = 8
 24:0|  3: <1, 1>                  |  version 1;
 26:4|  1: <65535, 0, 2>           |  abbreviations {  // BlockID = 0
 36:0|  0: <65534>                 |  }
 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 4>                |    count 4;
 50:4|    3: <7, 32>               |    @t0 = i32;
 53:6|    3: <2>                   |    @t1 = void;
 55:4|    3: <21, 0, 0, 0>         |    @t2 = i32 (i32);
 59:4|    3: <7, 1>                |    @t3 = i1;
 62:0|  0: <65534>                 |  }
 64:0|  3: <8, 2, 0, 0, 0>         |  define external i32 @f0(i32);
 68:6|  1: <65535, 19, 2>          |  globals {  // BlockID = 19
 76:0|    3: <5, 0>                |    count 0;
 78:4|  0: <65534>                 |  }
 80:0|  1: <65535, 14, 2>          |  valuesymtab {  // BlockID = 14
 88:0|    3: <1, 0, 102, 97, 99,   |    @f0 : "fact";
     |        116>                 |
 96:4|  0: <65534>                 |  }
100:0|  1: <65535, 12, 2>          |  function i32 @f0(i32 %p0) {
     |                             |                   // BlockID = 12
108:0|    3: <1, 3>                |    blocks 3;
110:4|    1: <65535, 11, 2>        |    constants {  // BlockID = 11
120:0|      3: <1, 0>              |      i32:
122:4|      3: <4, 2>              |        %c0 = i32 1;
125:0|    0: <65534>               |      }
     |                             |  %b0:
128:0|    3: <28, 2, 1, 32>        |    %v0 = icmp eq i32 %p0, %c0;
132:6|    3: <11, 1, 2, 1>         |    br i1 %v0, label %b1, label %b2;
     |                             |  %b1:
136:6|    3: <10, 2>               |    ret i32 %c0;
     |                             |  %b2:
139:2|    3: <2, 3, 2, 1>          |    %v1 = sub i32 %p0, %c0;
143:2|    3: <34, 0, 5, 1>         |    %v2 = call i32 @f0(i32 %v1);
148:0|    3: <2, 5, 1, 2>          |    %v3 = mul i32 %p0, %v2;
152:0|    3: <10, 1>               |    ret i32 %v3;
154:4|  0: <65534>                 |  }
156:0|0: <65534>                   |}

Note that there are three columns in this output. The first column contains the bit positions of the records within the bitcode file. The second column contains the sequence of records within the bitcode file. The third column contains the corresponding PNaClAsm program.

Bit positions are defined by a pair B:N. B is the number of bytes, while N is the bit offset within the B-th byte. Hence, the bit position (in bits) is:

B*8 + N

Hence, the first record is at bit offset 0 (0*8+0). The second record is at bit offset 128 (16*8+0). The third record is at bit offset 192 (24*8+0). The fourth record is at bit offset 212 (26*8+4).

The header record is a sequence of 16 bytes, defining the contents of the first 16 bytes of the bitcode file. These bytes never change, and are expected for all version 2, PNaCl bitcode files. The first four bytes define the magic number of the file, i.e. ‘PEXE’. All PEXE bitcode files begin with these four bytes.

All but the header record has an abbreviation index associated with it. Since no user-defined abbreviations are provided, all records were converted to bit sequences using default abbreviations.

The types block (starting at bit address 40:0), defines 4 types: i1, i32, void, and function signature i32 (i32).

Bit address 64:0 declares the factorial function address @f0, and its corresponding type signature. Bit address 88:0 associates the name fact with function address @f0.

Bit address 100:0 defines the function block that implements function fact. The entry point is %b0 (at bit address 128:0). It uses the 32-bit integer constant 1 (defined at bit addresses 122:4). Bit address 128:0 defines an equality comparison of the argument %p0 with 1 (constant %c0). Bit address 132:6 defines a conditional branch. If the result of the previous comparison (%v0) is true, the program will branch to block %b1. Otherwise it will branch to block %b2.

Bit address 136:6 returns constant 1 (%c0) when the input parameter is 1. Instructions between bit address 139:2 and 154:4 compute and return n * fact(n-1).

Road Map

At this point, this document transitions from basic concepts to the details of how records should be formatted. This section defines the road map to the remaining sections in this document.

Many records have implicit information associated with them, and must be maintained across records. Global state describes how this implicit information is modeled. In addition, there are various support functions that are used to define the semantics of records, and how they update the global state.

There are just a handful of global records (records that either don’t appear in any block, or can appear in all blocks). Global records describes these records. This includes the block delimiter records enter and exit that define block boundaries.

PNaClAsm is a strongly typed language, and most block values are typed. types describes the set of legal types, and how to define types.

Global variables and their initializers are presented in the globals block. Function addresses are part of the module block, but must be defined before any global variables.

Names to be associated with global variables and function addresses, are defined in the valuesymtab block, and must appear after the globals block, but before any function definition.

The module block is the top-most block, and all other blocks must appear within the module block. The module block defines the executable in the bitcode file.

Constants used within a function definition must be defined using a constants block. Each function definition is defined by a function block and constant blocks can only appear within function blocks. Constants defined within a constant block can only be used in the enclosing function block.

Function definitions are defined by a sequence of instructions. There are several types of instructions.

A terminator instruction is the last instruction in a basic block, and is a branch, return, or unreachable instruction.

There are integer and floating point binary operations. Integer binary instructions include both arithmetic and logical operations. Floating point instructions define arithmetic operations.

There are also memory access instructions that allow one to load and store values. That section also includes how to define local variables using the alloca instruction.

One can also convert integer and floating point values using conversion instructions.

Comparison instructions allow you to compare values.

Vector instructions allow you to build and update vectors. Corresponding intrinsic functions, as well as integer and floating point binary instructions allow you to apply operations to vectors.

In addition, other instructions are available. This includes function and procedure calls.

There are also memory alignment issues that should be considered for global and local variables, as well as load and store instructions.

Finally, how to pack records is described in the abbreviations section.

Global State

This section describes the global state associated with PNaClAsm. It is used to define contextual data that is carried between records.

In particular, PNaClAsm is a strongly typed language, and hence, we must track the type associated with values. Subsection Typing Functions describes the functions used to maintain typing information associated with values.

Values are implicitly ordered within a block, and the indices associated with the values do not appear in records. Rather, ID counters are used to figure out what corresponding ID name is associated with a value generating record. Subsection ID Counters defines counters maintained in the global state.

In several blocks, one of the first records in the block defines how many values are defined in in the block. The main purpose of these counts is to communicate to the PNaCl translator space requirements, or a limit so that it can detect bad references to values. Subsection Size Variables defines variables that hold size definitions in the corresponding records.

Finally, the function and constants block contain implicit context between records in those blocks. Subsection Other Variables defines the variables that contain this implicit context.

Typing Functions

Associated with most identifiers is a type. This type defines what type the corresponding value has. It is defined by the (initially empty) map:

TypeOf: ID -> Type

For each type in the types block, a corresponding inverse map:

TypeID: Type -> ID

is maintained to convert syntactic types to the corresponding type ID.

Note: This document assumes that map TypeID is automatically maintained during updates to map TypeOf (when given a type ID). Hence, Updates subsections will not contain assignments to this map.

Associated with each function identifier is its type signature. This is different than the type of the function identifier, since function identifiers represent the function address which is a pointer (and pointers are always implemented as a 32-bit integer following the ILP32 data model).

Function type signatures are maintained using:

TypeOfFcn: ID -> Type

In addition, if a function address has an implementing block, there is a corresponding implementation associated with the function address. To indicate which function addresses have implementations, we use the set:

DefiningFcnIDs: set(ID)

Each block defines one or more kinds of values. Value indices are generated sequentially, starting at zero. To capture this, the following counters are defined:

NumTypes
The number of types defined so far (in the types block).
NumFuncAddresses
The number of function addresses defined so far (in the module block).
NumGlobalAddresses
The number of global variable/constant addresses defined so far (in the globals block).
NumParams
The number of parameters defined for a function. Note: Unlike other counters, this value is set once, at the beginning of the corresponding function block, based on the type signature associated with the function.
NumFcnConsts
The number of constants defined in a function so far (in the corresponding nested constants block).
NumBasicBlocks
The number of basic blocks defined so far (within a function block).
NumValuedInsts
The number of instructions, generating values, defined so far (within a function block).

Size Variables

A number of blocks define expected sizes of constructs. These sizes are recorded in the following size variables:

ExpectedBasicBlocks
The expected number of basic blocks within a function implementation.
ExpectedTypes
The expected number of types defined in the types block.
ExpectedGlobals
The expected number of global variable/constant addresses in the globals block.
ExpectedInitializers
The expected number of initializers for a global variable/constant address in the globals block.

It is assumed that the corresponding ID counters are always smaller than the corresponding size variables (except ExpectedInitializers). That is:

NumBasicBlocks < ExpectedBasicBlocks
NumTypes < ExpectedTypes
NumGlobalAddresses < ExpectedGlobals

Other Variables

EnclosingFcnID
The function ID of the function block being processed.
ConstantsSetType
Holds the type associated with the last set type record in the constants block. Note: at the beginning of each constants block, this variable is set to type void.

Global Records

Global records are records that can appear in any block. These records have the same meaning in multiple kinds of blocks.

There are four global PNaCl records, each having its own record code. These global records are:

Header
The header record is the first record of a PNaCl bitcode file, and identifies the file’s magic number, as well as the bitcode version it uses. The record defines the sequence of bytes that make up the header and uniquely identifies the file as a PNaCl bitcode file.
Enter
An enter record defines the beginning of a block. Since blocks can be nested, one can appear inside other blocks, as well as at the top level.
Exit
An exit record defines the end of a block. Hence, it must appear in every block, to end the block.
Abbreviation
An abbreviation record defines a user-defined abbreviation to be applied to records within blocks. Abbreviation records appearing in the abbreviations block define global abbreviations. All other abbreviations are local to the block they appear in, and can only be used in that block.

All global records can’t have user-defined abbreviations associated with them. The default abbreviation is always used.

Header Record

The header record must be the first record in the file. It is the only record in the bitcode file that doesn’t have a corresponding construct in PNaClAsm. In addition, no abbreviation index is associated with it.

Syntax:

There is no syntax for header records in PNaClAsm.

Record:

<65532, 80, 69, 88, 69, 1, 0, 8, 0, 17, 0, 4, 0, 2, 0, 0, 0>

Semantics:

The header record defines the initial sequence of bytes that must appear at the beginning of all (PNaCl bitcode version 2) files. That sequence is the list of bytes inside the record (excluding the record code). As such, it uniquely identifies all PNaCl bitcode files.

Examples:

0:0|<65532, 80, 69, 88, 69, 1, 0,|Magic Number: 'PEXE' (80, 69, 88, 69)
   | 8, 0, 17, 0, 4, 0, 2, 0, 0, |PNaCl Version: 2
   | 0>                          |

Enter Block Record

Block records can be top-level, as well as nested in other blocks. Blocks must begin with an enter record, and end with an exit record.

Syntax:

N {                                             <B>

Record:

1: <65535, ID, B>

Semantics:

Enter block records define the beginning of a block. B, if present, is the number of bits needed to represent all possible abbreviation indices used within the block. If omitted, B=2 is assumed.

The block ID value is dependent on the name N. Valid names and corresponding BlockID values are defined as follows:

NBlock ID
abbreviations0
constants11
function12
globals19
module8
types17
valuesymtab14

Note: For readability, PNaClAsm defines a more readable form of a function block enter record. See function blocks for more details.

Examples:

16:0|1: <65535, 8, 2>             |module {  // BlockID = 8
24:0|  3: <1, 1>                  |  version 1;
26:4|  1: <65535, 0, 2>           |  abbreviations {  // BlockID = 0
36:0|  0: <65534>                 |  }
40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
48:0|    3: <1, 2>                |    count 2;
50:4|    3: <2>                   |    @t0 = void;
52:2|    3: <21, 0, 0>            |    @t1 = void ();
55:4|  0: <65534>                 |  }
56:0|  3: <8, 1, 0, 1, 0>         |  declare external void @f0();
60:6|  1: <65535, 19, 2>          |  globals {  // BlockID = 19
68:0|    3: <5, 0>                |    count 0;
70:4|  0: <65534>                 |  }
72:0|0: <65534>                   |}

Exit Block Record

Block records can be top-level, as well as nested, records. Blocks must begin with an enter record, and end with an exit record.

Syntax:

}

Record:

0: <65534>

Semantics:

All exit records are identical, no matter what block they are ending. An exit record defines the end of the block.

Examples:

16:0|1: <65535, 8, 2>             |module {  // BlockID = 8
24:0|  3: <1, 1>                  |  version 1;
26:4|  1: <65535, 0, 2>           |  abbreviations {  // BlockID = 0
36:0|  0: <65534>                 |  }
40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
48:0|    3: <1, 2>                |    count 2;
50:4|    3: <2>                   |    @t0 = void;
52:2|    3: <21, 0, 0>            |    @t1 = void ();
55:4|  0: <65534>                 |  }
56:0|  3: <8, 1, 0, 1, 0>         |  declare external void @f0();
60:6|  1: <65535, 19, 2>          |  globals {  // BlockID = 19
68:0|    3: <5, 0>                |    count 0;
70:4|  0: <65534>                 |  }
72:0|0: <65534>                   |}

Abbreviation Record

Abbreviation records define abbreviations. See abbreviations for details on how abbreviations should be written. This section only presents the mechanical details for converting an abbreviation into a PNaCl record.

Syntax:

A = abbrev <E1, ... , EM>;

Record:

2: <65533, M, EE1, ... , EEM>

Semantics:

Defines an abbreviation A as the sequence of encodings E1 through EM. If the abbreviation appears within the abbreviations block, A must be a global abbreviation. Otherwise, A must be a local abbreviation.

Abbreviations within a block (or a section within the abbreviations block), must be enumerated in order, starting at index 0.

Valid encodings Ei, and the corresponding sequence of (unsigned) integers EEi, ( for 1 <= i <= M) are defined by the following table:

EiEEiForm
C1, CLiteral C in corresponding position in record.
fixed(N)0, 1, NEncode value as a fixed sequence of N bits.
vbr(N)0, 2, NEncode value using a variable bit rate of N.
char60, 4Encode value as 6-bit char containing characters [a-zA-Z0-9._].
array0, 3Allow zero or more of the succeeding abbreviation.

Note that ‘array’ can only appear as the second to last element in the abbreviation. Notationally, array(EM) is used in place of array and EM, the last two entries in an abbreviation.

Examples:

  0:0|<65532, 80, 69, 88, 69, 1, 0,|Magic Number: 'PEXE' (80, 69, 88, 69)
     | 8, 0, 17, 0, 4, 0, 2, 0, 0, |PNaCl Version: 2
     | 0>                          |
 16:0|1: <65535, 8, 2>             |module {  // BlockID = 8
 24:0|  3: <1, 1>                  |  version 1;
 26:4|  1: <65535, 0, 2>           |  abbreviations {  // BlockID = 0
 36:0|    1: <1, 14>               |    valuesymtab:
 38:4|    2: <65533, 4, 0, 1, 3, 0,|      @a0 = abbrev <fixed(3), vbr(8),
     |        2, 8, 0, 3, 0, 1, 8> |                   array(fixed(8))>;
 43:2|    2: <65533, 4, 1, 1, 0, 2,|      @a1 = abbrev <1, vbr(8),
     |        8, 0, 3, 0, 1, 7>    |                   array(fixed(7))>;
 48:0|    2: <65533, 4, 1, 1, 0, 2,|      @a2 = abbrev <1, vbr(8),
     |        8, 0, 3, 0, 4>       |                   array(char6)>;
 52:1|    2: <65533, 4, 1, 2, 0, 2,|      @a3 = abbrev <2, vbr(8),
     |        8, 0, 3, 0, 4>       |                   array(char6)>;
 56:2|    1: <1, 11>               |    constants:
 58:6|    2: <65533, 2, 1, 1, 0, 1,|      @a0 = abbrev <1, fixed(2)>;
     |        2>                   |
 61:7|    2: <65533, 2, 1, 4, 0, 2,|      @a1 = abbrev <4, vbr(8)>;
     |        8>                   |
 65:0|    2: <65533, 2, 1, 4, 1, 0>|      @a2 = abbrev <4, 0>;
 68:1|    2: <65533, 2, 1, 6, 0, 2,|      @a3 = abbrev <6, vbr(8)>;
     |        8>                   |
 71:2|    1: <1, 12>               |    function:
 73:6|    2: <65533, 4, 1, 20, 0,  |      @a0 = abbrev <20, vbr(6), vbr(4),
     |        2, 6, 0, 2, 4, 0, 2, |                   vbr(4)>;
     |        4>                   |
 79:1|    2: <65533, 4, 1, 2, 0, 2,|      @a1 = abbrev <2, vbr(6), vbr(6),
     |        6, 0, 2, 6, 0, 1, 4> |                   fixed(4)>;
 84:4|    2: <65533, 4, 1, 3, 0, 2,|      @a2 = abbrev <3, vbr(6),
     |        6, 0, 1, 2, 0, 1, 4> |                   fixed(2), fixed(4)>;
 89:7|    2: <65533, 1, 1, 10>     |      @a3 = abbrev <10>;
 91:7|    2: <65533, 2, 1, 10, 0,  |      @a4 = abbrev <10, vbr(6)>;
     |        2, 6>                |
 95:0|    2: <65533, 1, 1, 15>     |      @a5 = abbrev <15>;
 97:0|    2: <65533, 3, 1, 43, 0,  |      @a6 = abbrev <43, vbr(6),
     |        2, 6, 0, 1, 2>       |                   fixed(2)>;
101:2|    2: <65533, 4, 1, 24, 0,  |      @a7 = abbrev <24, vbr(6), vbr(6),
     |        2, 6, 0, 2, 6, 0, 2, |                   vbr(4)>;
     |        4>                   |
106:5|    1: <1, 19>               |    globals:
109:1|    2: <65533, 3, 1, 0, 0, 2,|      @a0 = abbrev <0, vbr(6),
     |        6, 0, 1, 1>          |                   fixed(1)>;
113:3|    2: <65533, 2, 1, 1, 0, 2,|      @a1 = abbrev <1, vbr(8)>;
     |        8>                   |
116:4|    2: <65533, 2, 1, 2, 0, 2,|      @a2 = abbrev <2, vbr(8)>;
     |        8>                   |
119:5|    2: <65533, 3, 1, 3, 0, 3,|      @a3 = abbrev <3, array(fixed(8))>
     |        0, 1, 8>             |          ;
123:2|    2: <65533, 2, 1, 4, 0, 2,|      @a4 = abbrev <4, vbr(6)>;
     |        6>                   |
126:3|    2: <65533, 3, 1, 4, 0, 2,|      @a5 = abbrev <4, vbr(6), vbr(6)>;
     |        6, 0, 2, 6>          |
130:5|  0: <65534>                 |  }
132:0|  1: <65535, 17, 3>          |  types {  // BlockID = 17
140:0|    2: <65533, 4, 1, 21, 0,  |    %a0 = abbrev <21, fixed(1),
     |        1, 1, 0, 3, 0, 1, 2> |                  array(fixed(2))>;
144:7|    3: <1, 3>                |    count 3;
147:4|    3: <7, 32>               |    @t0 = i32;
150:7|    4: <21, 0, 0, 0, 0>      |    @t1 = i32 (i32, i32); <%a0>
152:7|    3: <2>                   |    @t2 = void;
154:6|  0: <65534>                 |  }
156:0|  3: <8, 1, 0, 0, 0>         |  define external i32 @f0(i32, i32);
160:6|  1: <65535, 19, 4>          |  globals {  // BlockID = 19
168:0|    3: <5, 0>                |    count 0;
170:6|  0: <65534>                 |  }
172:0|  1: <65535, 14, 3>          |  valuesymtab {  // BlockID = 14
180:0|    6: <1, 0, 102>           |    @f0 : "f"; <@a2>
182:7|  0: <65534>                 |  }
184:0|  1: <65535, 12, 4>          |  function i32 @f0(i32 %p0, i32 %p1) {
     |                             |                   // BlockID = 12
192:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
194:6|    5: <2, 2, 1, 0>          |    %v0 = add i32 %p0, %p1; <@a1>
197:2|    5: <2, 3, 1, 0>          |    %v1 = add i32 %p0, %v0; <@a1>
199:6|    8: <10, 1>               |    ret i32 %v1; <@a4>
201:0|  0: <65534>                 |  }
204:0|0: <65534>                   |}

Note that the example above shows the standard abbreviations used by pnacl-finalize.

Types Block

The types block defines all types used in a program. It must appear in the module block, before any function address records, the globals block, the valuesymtab block, and any function blocks.

All types used in a program must be defined in the types block. Many PNaClAsm constructs allow one to use explicit type names, rather than the type identifiers defined by this block. However, they are internally converted to the corresponding type identifier in the types block. Hence, the requirement that the types block must appear early in the module block.

Each record in the types block defines a type used by the program. Types can be broken into the following groups:

Primitive value types
Defines the set of base types for values. This includes various sizes of integer and floating point types.
Void type
A primitive type that doesn’t represent any value and has no size.
Function types
The type signatures of functions.
Vector type
Defines vectors of primitive types.

In addition, any type that is not defined using another type is a primitive type. All other types (i.e. function and vector) are composite types.

Types must be defined in a topological order, causing primitive types to appear before the composite types that use them. Each type must be unique. There are no additional restrictions on the order that types can be defined in a types block.

The following subsections introduce each valid PNaClAsm type, and the corresponding PNaClAsm construct that defines the type. Types not defined in the types block, can’t be used in a PNaCl program.

The first record of a types block must be a count record, defining how many types are defined by the types block. All remaining records defines a type. The following subsections defines valid records within a types block. The order of type records is important. The position of each defining record implicitly defines the type ID that will be used to denote that type, within other PNaCl records of the bitcode file.

To make this more concrete, consider the following example types block:

40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
48:0|    3: <1, 4>                |    count 4;
50:4|    3: <7, 32>               |    @t0 = i32;
53:6|    3: <3>                   |    @t1 = float;
55:4|    3: <2>                   |    @t2 = void;
57:2|    3: <21, 0, 2, 0, 1>      |    @t3 = void (i32, float);
62:0|  0: <65534>                 |  }

This example defines a types block that defines four type IDs:

@t0
A 32-bit integer type.
@t1
A 32-bit floating point type.
@t2
The void type.
@t3
A function, taking 32-bit integer and float point arguments that returns void.

Count Record

The count record defines how many types are defined in the types block. Following the types count record are records that define types used by the PNaCl program.

Syntax:

count N;                                       <A>

Record:

AA: <1, N>

Semantics:

This construct defines the number of types used by the PNaCl program. N is the number of types defined in the types block. It is an error to define more (or fewer) types than value N, within the enclosing types block.

Constraints:

AA == AbbrevIndex(A) &
0 == NumTypes

Updates:

ExpectedTypes = N;

Examples:

40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
48:0|    3: <1, 4>                |    count 4;
50:4|    3: <7, 32>               |    @t0 = i32;
53:6|    3: <3>                   |    @t1 = float;
55:4|    3: <2>                   |    @t2 = void;
57:2|    3: <21, 0, 2, 0, 1>      |    @t3 = void (i32, float);
62:0|  0: <65534>                 |  }

Void Type

The void type record defines the void type, which corresponds to the type that doesn’t define any value, and has no size.

Syntax:

@tN = void;                                     <A>

Record:

AA: <2>

Semantics:

The void type record defines the type that has no values and has no size.

Constraints:

AA == AbbrevIndex(A) &
N == NumTypes

Updates:

++NumTypes;
TypeOf(@tN) = void;

Examples:

40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
48:0|    3: <1, 4>                |    count 4;
50:4|    3: <7, 32>               |    @t0 = i32;
53:6|    3: <3>                   |    @t1 = float;
55:4|    3: <2>                   |    @t2 = void;
62:0|  0: <65534>                 |  }

Integer Types

PNaClAsm allows integer types for various bit sizes. Valid bit sizes are 1, 8, 16, 32, and 64. Integers can be signed or unsigned, but the signed component of an integer is not specified by the type. Rather, individual instructions determine whether the value is assumed to be signed or unsigned.

It should be noted that in PNaClAsm, all pointers are implemented as 32-bit (unsigned) integers. There isn’t a separate type for pointers. The only way to tell that a 32-bit integer is a pointer, is when it is used in an instruction that requires a pointer (such as load and store instructions).

Syntax:

@tN = iB;                                      <A>

Record:

AA: <7, B>

Semantics:

An integer type record defines an integer type. B defines the number of bits of the integer type.

Constraints:

AA == AbbrevIndex(A) &
N == NumTypes &
B in {1, 8, 16, 32, 64}

Updates:

++NumTypes;
TypeOf(@tN) = iB;

Examples:

40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
48:0|    3: <1, 7>                |    count 7;
50:4|    3: <7, 64>               |    @t0 = i64;
53:6|    3: <7, 1>                |    @t1 = i1;
56:2|    3: <7, 8>                |    @t2 = i8;
58:6|    3: <7, 16>               |    @t3 = i16;
61:2|    3: <7, 32>               |    @t4 = i32;
64:4|    3: <21, 0, 0, 1>         |    @t5 = i64 (i1);
68:4|    3: <2>                   |    @t6 = void;
70:2|  0: <65534>                 |  }

32-Bit Floating Point Type

PNaClAsm allows computation on 32-bit floating point values. A floating point type record defines the 32-bit floating point type.

Syntax:

@tN = float;                                    <A>

Record:

AA: <3>

Semantics:

A floating point type record defines the 32-bit floating point type.

Constraints:

AA == AbbrevIndex(A) &
N == NumTypes

Updates:

++NumTypes;
TypeOf(@tN) = float;

Examples:

40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
48:0|    3: <1, 4>                |    count 4;
50:4|    3: <4>                   |    @t0 = double;
52:2|    3: <3>                   |    @t1 = float;
54:0|    3: <21, 0, 0, 1>         |    @t2 = double (float);
58:0|    3: <2>                   |    @t3 = void;
59:6|  0: <65534>                 |  }

64-bit Floating Point Type

PNaClAsm allows computation on 64-bit floating point values. A 64-bit floating type record defines the 64-bit floating point type.

Syntax:

@tN = double;                                   <A>

Record:

AA: <4>

Semantics:

A double type record defines the 64-bit floating point type.

Constraints:

AA == AbbrevIndex(A) &
N == NumTypes

Updates:

++NumTypes;
TypeOf(@tN) = double;

Examples:

40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
48:0|    3: <1, 4>                |    count 4;
50:4|    3: <4>                   |    @t0 = double;
52:2|    3: <3>                   |    @t1 = float;
54:0|    3: <21, 0, 0, 1>         |    @t2 = double (float);
58:0|    3: <2>                   |    @t3 = void;
59:6|  0: <65534>                 |  }

Vector Types

A vector type is a derived type that represents a vector of elements. Vector types are used when multiple primitive data values are operated in parallel using a single (SIMD) vector instruction. A vector type requires a size (number of elements) and an underlying primitive data type.

Syntax:

@tN = < E x T >                                 <A>

Record:

AA: <12, E, TT>

Semantics:

The vector type defines a vector of elements. T is the type of each element. E is the number of elements in the vector.

Vector types can only be defined on i1, i8, i16, i32, and float. All vector types, except those on i1, must contain exactly 128 bits. The valid element sizes are restricted as follows:

TypeValid element sizes
i14, 8, 16
i816
i168
i324
float4

Constraints:

AA == AbbrevIndex(A) &
TT == AbsoluteIndex(TypeID(T)) &
N == NumTypes

Updates:

++NumTypes
TypeOf(@tN) = <E x T>

Examples:

40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
48:0|    3: <1, 14>               |    count 14;
50:4|    3: <7, 32>               |    @t0 = i32;
53:6|    3: <7, 1>                |    @t1 = i1;
56:2|    3: <2>                   |    @t2 = void;
58:0|    3: <12, 4, 1>            |    @t3 = <4 x i1>;
61:2|    3: <12, 8, 1>            |    @t4 = <8 x i1>;
64:4|    3: <12, 16, 1>           |    @t5 = <16 x i1>;
67:6|    3: <7, 8>                |    @t6 = i8;
70:2|    3: <12, 16, 6>           |    @t7 = <16 x i8>;
73:4|    3: <7, 16>               |    @t8 = i16;
76:0|    3: <12, 8, 8>            |    @t9 = <8 x i16>;
79:2|    3: <12, 4, 0>            |    @t10 = <4 x i32>;
82:4|    3: <3>                   |    @t11 = float;
84:2|    3: <12, 4, 11>           |    @t12 = <4 x float>;
87:4|    3: <21, 0, 2>            |    @t13 = void ();
90:6|  0: <65534>                 |  }

Function Type

The function type can be thought of as a function signature. It consists of a return type, and a (possibly empty) list of formal parameter types.

Syntax:

%tN = RT (T1, ... , TM)                         <A>

Record:

AA: <21, 0, IRT, IT1, ... , ITM>

Semantics:

The function type defines the signature of a function. RT is the return type of the function, while types T1 through TM are the types of the arguments. Indices to the corresponding type identifiers are stored in the corresponding record.

The return value must either be a primitive type, type void, or a vector type. Parameter types can be a primitive or vector type.

For ordinary functions, the only valid integer types that can be used for a return or parameter type are i32 and i64. All other integer types are not allowed.

For intrinsic functions, all integer types are allowed for both return and parameter types.

Constraints:

AA == AbbrevIndex(A) &
M >= 0 &
IRT == AbsoluteIndex(TypeID(RT)) &
IT1 == AbsoluteIndex(TypeID(T1)) &
...
ITM == AbsoluteIndex(TypeID(TM)) &
N == NumTypes

Updates:

++NumTypes
TypeOf(@tN) = RT (T1, ... , TM)

Examples:

40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
48:0|    3: <1, 7>                |    count 7;
50:4|    3: <7, 32>               |    @t0 = i32;
53:6|    3: <3>                   |    @t1 = float;
55:4|    3: <4>                   |    @t2 = double;
57:2|    3: <21, 0, 2, 1>         |    @t3 = double (float);
61:2|    3: <2>                   |    @t4 = void;
63:0|    3: <21, 0, 4>            |    @t5 = void ();
66:2|    3: <21, 0, 0, 0, 1, 0, 2>|    @t6 =
    |                             |        i32 (i32, float, i32, double);
72:4|  0: <65534>                 |  }

Globals Block

The globals block defines global addresses of variables and constants, used by the PNaCl program. It also defines the memory associated with the global addresses, and how to initialize each global variable/constant. It must appear in the module block. It must appear after the types block, as well as after all function address records. But, it must also appear before the valuesymtab block, and any function blocks.

The globals block begins with a count record, defining how many global addresses are defined by the PNaCl program. It is then followed by a sequence of records that defines each global address, and how each global address is initialized.

The standard sequence, for defining global addresses, begins with a global address record. It is then followed by a sequence of records defining how the global address is initialized. If the initializer is simple, a single record is used. Otherwise, the initializer is preceded with a compound record, specifying a number N, followed by sequence of N simple initializer records.

The size of the memory referenced by each global address is defined by its initializer records. All simple initializer records define a sequence of bytes. A compound initializer defines the sequence of bytes by concatenating the corresponding sequence of bytes for each of its simple initializer records.

For notational convenience, PNaClAsm begins a compound record with a “{”, and inserts a “}” after the last initializer record associated with the compound record. This latter “}” does not correspond to any record. It is implicitly assumed by the size specified in the compound record, and is added only to improve readability.

Explicit alignment is specified for global addresses, and must be a power of 2. See memory blocks and alignment for a more detailed discussion on how to define alignment.

For example, consider the following pnacl-bcdis output snippet:

52:0|  1: <65535, 19, 2>          |  globals {  // BlockID = 19
60:0|    3: <5, 2>                |    count 2;
62:4|    3: <0, 1, 1>             |    const @g0, align 1,
65:6|    3: <2, 8>                |      zerofill 8;
68:2|    3: <0, 1, 0>             |    var @g1, align 1,
71:4|    3: <1, 2>                |      initializers 2 {
74:0|    3: <3, 1, 2, 3, 4>       |        {  1,   2,   3,   4}
78:6|    3: <2, 2>                |        zerofill 2;
    |                             |      }
81:2|  0: <65534>                 |  }

This snippet defines the global constant @g0, and the global variable @g1. @g0 is 8 bytes long, and initialized to zero. @g1 is initialized with 6 bytes: 1 2 3 4 0 0.

The count record defines the number of global addresses used by the PNaCl program.

Syntax:

count N;                                       <A>

Record:

AA: <5, N>

Semantics:

This record must appear first in the globals block. The count record defines the number of global addresses used by the program.

Constraints:

AA == AbbrevIndex(A)

Updates:

ExpectedGlobals = N;
ExpectedInitializers = 0;

Examples:

52:0|  1: <65535, 19, 2>          |  globals {  // BlockID = 19
60:0|    3: <5, 2>                |    count 2;
62:4|    3: <0, 1, 1>             |    const @g0, align 1,
65:6|    3: <2, 8>                |      zerofill 8;
68:2|    3: <0, 1, 0>             |    var @g1, align 1,
71:4|    3: <1, 2>                |      initializers 2 {
74:0|    3: <3, 1, 2, 3, 4>       |        {  1,   2,   3,   4}
78:6|    3: <2, 2>                |        zerofill 2;
    |                             |      }
81:2|  0: <65534>                 |  }

Global Variable Addresses

A global variable address record defines a global address to global data. The global variable address record must be immediately followed by initializer record(s) that define how the corresponding global variable is initialized.

Syntax:

var @gN, align V,                               <A>

Record:

AA: <0, VV, 0>

Semantics:

A global variable address record defines a global address for a global variable. V is the memory alignment for the global variable address, and is a power of 2.

It is assumed that the memory, referenced by the global variable address, can be both read and written to.

Constraints:

AA == AbbrevIndex(A) &
N == NumGlobalAddresses &
ExpectedInitializers == 0 &
VV == Log2(V+1)

Updates:

++NumGlobalAddresses;
ExpectedInitializers = 1;
TypeOf(@gN) = i32;

Examples:

52:0|  1: <65535, 19, 2>          |  globals {  // BlockID = 19
60:0|    3: <5, 2>                |    count 2;
62:4|    3: <0, 3, 0>             |    var @g0, align 4,
65:6|    3: <2, 8>                |      zerofill 8;
68:2|    3: <0, 1, 0>             |    var @g1, align 1,
71:4|    3: <3, 1, 2, 3, 4>       |      {  1,   2,   3,   4}
76:2|  0: <65534>                 |  }
80:0|0: <65534>                   |}

Global Constant Addresses

A global constant address record defines an address corresponding to a global constant that can’t be modified by the program. The global constant address record must be immediately followed by initializer record(s) that define how the corresponding global constant is initialized.

Syntax:

const @gN, align V,                             <A>

Record:

AA: <0, VV, 1>

Semantics:

A global constant address record defines a global address for a global constant. V is the memory alignment for the global constant address, and is a power of 2.

It is assumed that the memory, referenced by the global constant address, is only read, and can’t be written to.

Note that the only difference between a global variable address and a global constant address record is the third element of the record. If the value is zero, it defines a global variable address. If the value is one, it defines a global constant address.

Constraints:

AA == AbbrevIndex(A) &
N == NumGlobalAddresses &
ExpectedInitializers == 0 &
VV == Log2(V+1)

Updates:

++NumGlobalAddresses;
ExpectedInitializers = 1;
TypeOf(@gN) = i32;

Examples:

52:0|  1: <65535, 19, 2>          |  globals {  // BlockID = 19
60:0|    3: <5, 2>                |    count 2;
62:4|    3: <0, 3, 1>             |    const @g0, align 4,
65:6|    3: <2, 8>                |      zerofill 8;
68:2|    3: <0, 1, 1>             |    const @g1, align 1,
71:4|    3: <3, 1, 2, 3, 4>       |      {  1,   2,   3,   4}
76:2|  0: <65534>                 |  }

Zerofill Initializer

The zerofill initializer record initializes a sequence of bytes, associated with a global address, with zeros.

Syntax:

zerofill N;                                     <A>

Record:

AA: <2, N>

Semantics:

A zerofill initializer record initializes a sequence of bytes, associated with a global address, with zeros. The number of bytes initialized to zero is N.

Constraints:

AA == AbbrevIndex(A) &
ExpectedInitializers > 0

Updates:

--ExpectedInitializers;

Examples:

52:0|  1: <65535, 19, 2>          |  globals {  // BlockID = 19
60:0|    3: <5, 2>                |    count 2;
62:4|    3: <0, 3, 1>             |    const @g0, align 4,
65:6|    3: <2, 8>                |      zerofill 8;
68:2|    3: <0, 1, 0>             |    var @g1, align 1,
71:4|    3: <2, 4>                |      zerofill 4;
74:0|  0: <65534>                 |  }

Data Initializer

Data records define a sequence of bytes. These bytes define the initial value of the contents of the corresponding memory.

Syntax:

{ B1 , .... , BN }                              <A>

Record:

AA: <3, B1, ..., BN>

Semantics:

A data record defines a sequence of (unsigned) bytes B1 through BN, that initialize N bytes of memory.

Constraints:

AA == AbbrevIndex(A) &
ExpectedInitializers > 0

Updates:

--ExpectedInitializers;

Examples:

 56:0|  3: <8, 1, 0, 1, 0>         |  declare external void @f0();
 60:6|  1: <65535, 19, 2>          |  globals {  // BlockID = 19
 68:0|    3: <5, 2>                |    count 2;
 70:4|    3: <0, 1, 1>             |    const @g0, align 1,
 73:6|    3: <3, 1, 2, 97, 36, 44, |      {  1,   2,  97,  36,  44,  88,
     |        88, 44, 50>          |        44,  50}
 86:0|    3: <0, 1, 1>             |    const @g1, align 1,
 89:2|    3: <1, 3>                |      initializers 3 {
 91:6|    3: <3, 1, 2, 3, 4>       |        {  1,   2,   3,   4}
 96:4|    3: <4, 0>                |        reloc @f0;
 99:0|    3: <3, 99, 66, 22, 12>   |        { 99,  66,  22,  12}
     |                             |      }
105:2|  0: <65534>                 |  }

Relocation Initializer

A relocation initializer record allows one to define the initial value of a global address with the value of another global address (i.e. either function, variable, or constant). Since addresses are pointers, a relocation initializer record defines 4 bytes of memory.

Syntax:

reloc V;                                        <A>

Record:

AA: <4, VV>

Semantics:

A relocation initializer record defines a 4-byte value containing the specified global address V.

Constraints:

AA == AbbrevIndex(A) &
VV == AbsoluteIndex(V) &
VV >= NumFuncAddresses &
VV < NumFuncAddresses + ExpectedGlobals &
ExpectedInitializers > 0

Updates:

--ExpectedInitializers;

Examples:

40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
48:0|    3: <1, 2>                |    count 2;
50:4|    3: <2>                   |    @t0 = void;
52:2|    3: <21, 0, 0>            |    @t1 = void ();
55:4|  0: <65534>                 |  }
56:0|  3: <8, 1, 0, 1, 0>         |  declare external void @f0();
60:6|  1: <65535, 19, 2>          |  globals {  // BlockID = 19
68:0|    3: <5, 2>                |    count 2;
70:4|    3: <0, 1, 0>             |    var @g0, align 1,
73:6|    3: <1, 3>                |      initializers 3 {
76:2|    3: <4, 0>                |        reloc @f0;
78:6|    3: <4, 1>                |        reloc @g0;
81:2|    3: <4, 2>                |        reloc @g1;
    |                             |      }
83:6|    3: <0, 3, 0>             |    var @g1, align 4,
87:0|    3: <2, 4>                |      zerofill 4;
89:4|  0: <65534>                 |  }

This example defines global address @g0 and @g1. @g0 defines 12 bytes of memory, and is initialized with three addresses @f1, @g0, and @g1. Note that all global addresses can be used in a relocation initialization record, even if it isn’t defined yet.

Subfield Relocation Initializer

A subfield relocation initializer record allows one to define the initial value of a global address with the value of another (non-function) global address (i.e. either variable or constant address), plus a constant. Since addresses are pointers, a relocation initializer record defines 4 bytes of memory.

Syntax:

reloc V + X;                                    <A>
reloc V - X;                                    <A>

Record:

AA: <4, VV, XXX>

Semantics:

A subfield relocation initializer record defines a 4-byte value containing the specified global (non-function) address V, modified by the unsigned offset X. XX is the corresponding signed offset. In the first form, XX == X. In the second form, XX == -X.

Constraints:

AA == AbbrevIndex(A)
VV == AbsoluteIndex(V)
VV >= NumFuncAddresses
VV < NumFuncAddresses + ExpectedGlobals
ExpectedInitializers > 0
XXX == SignRotate(XX)

Updates:

--ExpectedInitializers;

Examples:

40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
48:0|    3: <1, 0>                |    count 0;
50:4|  0: <65534>                 |  }
52:0|  1: <65535, 19, 2>          |  globals {  // BlockID = 19
60:0|    3: <5, 3>                |    count 3;
62:4|    3: <0, 1, 0>             |    var @g0, align 1,
65:6|    3: <1, 3>                |      initializers 3 {
68:2|    3: <4, 0, 1>             |        reloc @g0 + 1;
71:4|    3: <4, 1, 4294967295>    |        reloc @g1 - 1;
79:2|    3: <4, 2, 4>             |        reloc @g2 + 4;
    |                             |      }
82:4|    3: <0, 3, 0>             |    var @g1, align 4,
85:6|    3: <2, 4>                |      zerofill 4;
88:2|    3: <0, 3, 0>             |    var @g2, align 4,
91:4|    3: <2, 8>                |      zerofill 8;
94:0|  0: <65534>                 |  }

Compound Initializer

The compound initializer record must immediately follow a global variable or constant address record. It defines how many simple initializer records are used to define the initializer. The size of the corresponding memory is the sum of the bytes needed for each of the succeeding initializers.

Note that a compound initializer can’t be used as a simple initializer of another compound initializer (i.e. nested compound initializers are not allowed).

Syntax:

initializers N {                                <A>
 ...
}

Record:

AA: <1, N>

Semantics:

Defines that the next N initializers should be associated with the global address of the previous record.

Constraints:

AA == AbbrevIndex(A) &
ExpectedInitializers == 1

Updates:

ExpectedInitializers = N;

Examples:

40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
48:0|    3: <1, 0>                |    count 0;
50:4|  0: <65534>                 |  }
52:0|  1: <65535, 19, 2>          |  globals {  // BlockID = 19
60:0|    3: <5, 2>                |    count 2;
62:4|    3: <0, 0, 1>             |    const @g0, align 0,
65:6|    3: <1, 2>                |      initializers 2 {
68:2|    3: <2, 8>                |        zerofill 8;
70:6|    3: <3, 3, 2, 1, 0>       |        {  3,   2,   1,   0}
    |                             |      }
75:4|    3: <0, 0, 0>             |    var @g1, align 0,
78:6|    3: <1, 2>                |      initializers 2 {
81:2|    3: <3, 1, 2, 3, 4>       |        {  1,   2,   3,   4}
86:0|    3: <2, 2>                |        zerofill 2;
    |                             |      }
88:4|  0: <65534>                 |  }

Valuesymtab Block

The valuesymtab block does not define any values. Its only goal is to associate text names with external function addresses. Each association is defined by a record in the valuesymtab block. Currently, only intrinsic function addresses and the (external) start function (_start) can be named. All named function addresses must be external. Each record in the valuesymtab block is a entry record, defining a single name association.

Entry Record

The entry record defines a name for a function address.

Syntax:

V : "NAME";                                     <A>

Record:

AA: <1, B1, ... , BN>

Semantics:

The entry record defines a name NAME for function address V. NAME is a sequence of ASCII characters B1 through BN.

Examples:

 72:0|  3: <8, 4, 0, 1, 0>         |  declare external
     |                             |      void @f0(i32, i32, i32, i32, i1);
 76:6|  3: <8, 4, 0, 1, 0>         |  declare external
     |                             |      void @f1(i32, i32, i32, i32, i1);
 81:4|  3: <8, 5, 0, 0, 0>         |  define external void @f2(i32);
 86:2|  1: <65535, 19, 2>          |  globals {  // BlockID = 19
 92:0|    3: <5, 0>                |    count 0;
 94:4|  0: <65534>                 |  }
 96:0|  1: <65535, 14, 2>          |  valuesymtab {  // BlockID = 14
104:0|    3: <1, 1, 108, 108, 118, |    @f1 : "llvm.memmove.p0i8.p0i8.i32";
     |        109, 46, 109, 101,   |
     |        109, 109, 111, 118,  |
     |        101, 46, 112, 48,    |
     |        105, 56, 46, 112, 48,|
     |        105, 56, 46, 105, 51,|
     |        50>                  |
145:4|    3: <1, 2, 95, 115, 116,  |    @f2 : "_start";
     |        97, 114, 116>        |
157:0|    3: <1, 0, 108, 108, 118, |    @f0 : "llvm.memcpy.p0i8.p0i8.i32";
     |        109, 46, 109, 101,   |
     |        109, 99, 112, 121,   |
     |        46, 112, 48, 105, 56,|
     |        46, 112, 48, 105, 56,|
     |        46, 105, 51, 50>     |
197:0|  0: <65534>                 |  }

Module Block

The module block, like all blocks, is enclosed in a pair of enter / exit records, using block ID 8. A well-formed module block consists of the following records (in order):

A version record
The version record communicates which version of the PNaCl bitcode reader/writer should be used. Note that this is different than the PNaCl bitcode (ABI) version. The PNaCl bitcode (ABI) version defines what is expected in records, and is defined in the header record of the bitcode file. The version record defines the version of the PNaCl bitcode reader/writer to use to convert records into bit sequences.
Optional local abbreviations
Defines a list of local abbreviations to use for records within the module block.
An abbreviations block
The abbreviations block defines user-defined, global abbreviations that are used to convert PNaCl records to bit sequences in blocks following the abbreviations block.
A types block
The types block defines the set of all types used in the program.
A non-empty sequence of function address records
Each record defines a function address used by the program. Function addresses must either be external, or defined internally by the program. If they are defined by the program, there must be a function block (appearing later in the module) that defines the sequence of instructions for each defined function.
A globals block defining the global variables.
This block defines the set of global variable and constant addresses used by the program. In addition to the addresses, each global variable also defines how the corresponding global variable is initialized.
An optional value symbol table block.
This block, if defined, provides textual names for function addresses (previously defined in the module). Note that only names for intrinsic functions and the start function are specified.
A sequence of function blocks.
Each function block defines the corresponding intermediate representation for each defined function. The order of function blocks is used to associate them with function addresses. The order of the defined function blocks must follow the same order as the corresponding function addresses defined in the module block.

Descriptions of the abbreviations, types, globals, value symbol table, and function blocks are not provided here. See the appropriate reference for more details. The following subsections describe each of the records that can appear in a module block.

Version Record

The version record defines the implementation of the PNaCl bitstream reader/writer to use. That is, the implementation that converts PNaCl records to bit sequences, and converts them back to PNaCl records. Note that this is different than the PNaCl version of the bitcode file (encoded in the header record of the bitcode file). The PNaCl version defines the valid forms of PNaCl records. The version record is specific to the PNaCl version, and may have different values for different PNaCl versions.

Note that currently, only PNaCl bitcode version 2, and version record value 1 is defined.

Syntax:

version N;                                  <A>

Record:

AA: <1, N>

Semantics:

The version record defines which PNaCl reader/writer rules should be followed. N is the version number. Currently N must be 1. Future versions of PNaCl may define additional legal values.

Constraints:

AA == AbbrevIndex(A)

Examples:

16:0|1: <65535, 8, 2>             |module {  // BlockID = 8
24:0|  3: <1, 1>                  |  version 1;
26:4|  1: <65535, 0, 2>           |  abbreviations {  // BlockID = 0
36:0|  0: <65534>                 |  }

Function Address

A function address record describes a function address. Defined function addresses define implementations while declared function addresses do not.

Since a PNaCl program is assumed to be a complete (statically linked) executable, All functions should be defined and internal. The exception to this are intrinsic functions, which should only be declared and external, since intrinsic functions will be automatically converted to appropriate code by the PNaCl translator.

The implementation of a defined function address is provided by a corresponding function block, appearing later in the module block. The association of a defined function address with the corresponding function block is based on position. The Nth defined function address record, in the module block, has its implementation in the Nth function block of that module block.

Syntax:

PN LN T0 @fN ( T1 , ... , TM );                 <A>

Record:

AA: <8, T, C, P, L>

Semantics:

Describes the function address @fN. PN is the name that specifies the prototype value P associated with the function. A function address is defined only if P == 0. Otherwise, it is only declared. The type of the function is function type @tT. L is the linkage specification corresponding to name LN. C is the calling convention used by the function.

Note that function signature must be defined by a function type in the types block. Hence, the return value must either be a primitive type, type void, or a vector type.

For ordinary functions, integer parameter and types can only be i32 and i64. All other integer types are not allowed. For intrinsic functions, all integer types are allowed.

Valid prototype names PN, and corresponding P values, are:

PPN
1declare
0define

Valid linkage names LN, and corresponding L values, are:

LLN
3internal
0external

Currently, only one calling convention C is supported:

CCalling Convention
0C calling convention

Constraints:

AA = AbbrevIndex(A) &
T = TypeID(TypeOf(T0 ( T1 , ... , TN ))) &
N = NumFuncAddresses

Updates:

++NumFuncAddresses;
TypeOf(@fN) = TypeOf(TypeID(i32));
TypeOfFcn(@fN) = TypeOf(@tT);

if PN == 0:
  DefiningFcnIDs += @FN;
  ++NumDefinedFunctionAddresses;

Examples:

40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
48:0|    3: <1, 7>                |    count 7;
50:4|    3: <7, 32>               |    @t0 = i32;
53:6|    3: <3>                   |    @t1 = float;
55:4|    3: <4>                   |    @t2 = double;
57:2|    3: <2>                   |    @t3 = void;
59:0|    3: <21, 0, 2, 1>         |    @t4 = double (float);
63:0|    3: <21, 0, 0, 0, 1, 0, 2>|    @t5 =
    |                             |        i32 (i32, float, i32, double);
69:2|    3: <21, 0, 3>            |    @t6 = void ();
72:4|  0: <65534>                 |  }
76:0|  3: <8, 4, 0, 1, 0>         |  declare external double @f0(float);
80:6|  3: <8, 5, 0, 1, 0>         |  declare external
    |                             |      i32 @f1(i32, float, i32, double);
85:4|  3: <8, 6, 0, 0, 0>         |  define external void @f2();

Constants Blocks

Constants blocks define literal constants used within each function. Its intent is to define them once, before instructions. A constants block can only appear in a function block, and must appear before any instructions in the function block.

Currently, only integer literals, floating point literals, and undefined vector constants can be defined.

To minimize type information put in a constants block, the type information is separated from the constants. This allows a sequence of constants to be given the same type. This is done by defining a set type record, followed by a sequence of literal constants. These literal constants all get converted to the type of the preceding set type record.

Note that constants that are used for switch case selectors should not be added to the constants block, since the switch instruction contains the constants used for case selectors. All other constants in the function block must be put into a constants block, so that instructions can use them.

To make this more concrete, consider the following example constants block:

106:4|    1: <65535, 11, 2>        |    constants {  // BlockID = 11
116:0|      3: <1, 0>              |      i32:
118:4|      3: <4, 2>              |        %c0 = i32 1;
121:0|      3: <4, 4>              |        %c1 = i32 2;
123:4|      3: <1, 2>              |      i8:
126:0|      3: <4, 8>              |        %c2 = i8 4;
128:4|      3: <4, 6>              |        %c3 = i8 3;
131:0|      3: <1, 1>              |      float:
133:4|      3: <6, 1065353216>     |        %c4 = float 1;
139:6|    0: <65534>               |      }

Set Type Record

The set type record defines the type to use for the (immediately) succeeding literals.

Syntax:

T:                                              <A>

Record:

AA: <1, TT>

Semantics:

The set type record defines type T to be used to type the (immediately) succeeding literals. T must be a non-void primitive value type or a vector type.

Constraints:

TT == TypeID(T)

Updates:

ConstantsSetType = T;

Examples:

106:4|    1: <65535, 11, 2>        |    constants {  // BlockID = 11
116:0|      3: <1, 0>              |      i32:
118:4|      3: <4, 2>              |        %c0 = i32 1;
121:0|      3: <4, 4>              |        %c1 = i32 2;
123:4|      3: <1, 2>              |      i8:
126:0|      3: <4, 8>              |        %c2 = i8 4;
128:4|      3: <4, 6>              |        %c3 = i8 3;
131:0|      3: <1, 1>              |      float:
133:4|      3: <6, 1065353216>     |        %c4 = float 1;
139:6|    0: <65534>               |      }

Undefined Literal

The undefined literal record creates an undefined literal for the type T defined by the preceding set type record.

Note: See insert element instruction for an example of how you would use the undefined literal with vector types.

Syntax:

%cN = T undef;                              <50>

Record:

AA: <3>

Semantics:

The undefined literal record creates an undefined literal constant %cN for type T. T must be the type defined by the preceding set type record, and be a primitive value type or a vector type.

Constraints:

N == NumFcnConsts &
T == ConstantsSetType &
IsPrimitive(T) or IsVector(T)

Updates:

++NumFcnConsts;
TypeOf(%cN) = T;

Examples:

 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 5>                |    count 5;
 50:4|    3: <7, 32>               |    @t0 = i32;
 53:6|    3: <3>                   |    @t1 = float;
 55:4|    3: <2>                   |    @t2 = void;
 57:2|    3: <12, 4, 0>            |    @t3 = <4 x i32>;
 60:4|    3: <21, 0, 2>            |    @t4 = void ();
 63:6|  0: <65534>                 |  }
 ...
106:4|    1: <65535, 11, 2>        |    constants {  // BlockID = 11
116:0|      3: <1, 0>              |      i32:
118:4|      3: <3>                 |        %c0 = i32 undef;
120:2|      3: <4, 2>              |        %c1 = i32 1;
122:6|      3: <1, 3>              |      <4 x i32>:
125:2|      3: <3>                 |        %c2 = <4 x i32> undef;
127:0|      3: <1, 1>              |      float:
129:4|      3: <3>                 |        %c3 = float undef;
131:2|    0: <65534>               |      }

Integer Literal

The integer literal record creates an integer literal for the integer type T defined by the preceding set type record.

Syntax:

%cN = T V;                                      <A>

Record:

AA: <4, VV>

Semantics:

The integer literal record creates an integer literal constant %cN for type T. T must be the type defined by the preceding set type record, and an integer type. The literal V can be signed, but must be definable by type T.

Constraints:

N == NumFcnConsts &
T == ConstantsSetType &
VV == SignRotate(V) &
IsInteger(T)

Updates:

TypeOf(%cN) = T;

Examples:

 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 7>                |    count 7;
 50:4|    3: <7, 8>                |    @t0 = i8;
 53:0|    3: <7, 16>               |    @t1 = i16;
 55:4|    3: <7, 32>               |    @t2 = i32;
 58:6|    3: <7, 64>               |    @t3 = i64;
 62:0|    3: <7, 1>                |    @t4 = i1;
 64:4|    3: <2>                   |    @t5 = void;
 66:2|    3: <21, 0, 5>            |    @t6 = void ();
 69:4|  0: <65534>                 |  }
 ...
114:4|    1: <65535, 11, 2>        |    constants {  // BlockID = 11
124:0|      3: <1, 0>              |      i8:
126:4|      3: <4, 2>              |        %c0 = i8 1;
129:0|      3: <4, 4>              |        %c1 = i8 2;
131:4|      3: <1, 1>              |      i16:
134:0|      3: <4, 6>              |        %c2 = i16 3;
136:4|      3: <4, 8>              |        %c3 = i16 4;
139:0|      3: <1, 2>              |      i32:
141:4|      3: <4, 10>             |        %c4 = i32 5;
144:0|      3: <4, 12>             |        %c5 = i32 6;
146:4|      3: <1, 3>              |      i64:
149:0|      3: <4, 3>              |        %c6 = i64 -1;
151:4|      3: <4, 5>              |        %c7 = i64 -2;
154:0|      3: <1, 4>              |      i1:
156:4|      3: <4, 3>              |        %c8 = i1 1;
159:0|      3: <4, 0>              |        %c9 = i1 0;
161:4|    0: <65534>               |      }

Floating Point Literal

The floating point literal record creates a floating point literal for the floating point type T defined by the preceding set type record.

Syntax:

%cN = T V;                                      <A>

Record:

AA: <6, VV>

Semantics:

The floating point literal record creates a floating point literal constant %cN for type T. T must the type type defined by the preceding set type record, and be a floating point type. The literal V is the floating value to be defined. The value VV if the corresponding IEEE unsigned integer that defines value V. That is, the literal VV must be a valid IEEE 754 32-bit (unsigned integer) value if T is float, and a valid IEEE 754 64-bit (unsigned integer) value if T is double.

Constraints:

N == NumFcnConsts
T == ConstantsSetType
IsFloat(T)

Updates:

TypeOf(%cN) = T;

Examples:

 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 4>                |    count 4;
 50:4|    3: <3>                   |    @t0 = float;
 52:2|    3: <4>                   |    @t1 = double;
 54:0|    3: <2>                   |    @t2 = void;
 55:6|    3: <21, 0, 2>            |    @t3 = void ();
 59:0|  0: <65534>                 |  }
 ...
102:4|    1: <65535, 11, 2>        |    constants {  // BlockID = 11
112:0|      3: <1, 0>              |      float:
114:4|      3: <6, 0>              |        %c0 = float 0;
117:0|      3: <6, 1065353216>     |        %c1 = float 1;
123:2|      3: <6, 1088421888>     |        %c2 = float 7;
130:2|      3: <6, 1090519040>     |        %c3 = float 8;
137:2|      3: <3>                 |        %c4 = float undef;
139:0|      3: <6, 2143289344>     |        %c5 = float nan;
146:0|      3: <6, 2139095040>     |        %c6 = float inf;
153:0|      3: <6, 4286578688>     |        %c7 = float -inf;
160:0|      3: <1, 1>              |      double:
162:4|      3: <6,                 |        %c8 = double 1;
     |        4607182418800017408> |
174:0|      3: <6, 0>              |        %c9 = double 0;
176:4|      3: <6,                 |        %c10 = double 5;
     |        4617315517961601024> |
188:0|      3: <6,                 |        %c11 = double 6;
     |        4618441417868443648> |
199:4|      3: <6,                 |        %c12 = double nan;
     |        9221120237041090560> |
211:0|      3: <6,                 |        %c13 = double inf;
     |        9218868437227405312> |
222:4|      3: <6,                 |        %c14 = double -inf;
     |        18442240474082181120>|
234:0|    0: <65534>               |      }

Function Blocks

A function block defines the implementation of a defined function address. The function address it defines is based on the position of the corresponding defined function address. The Nth defined function address always corresponds to the Nth function block in the module block.

A function implementation contains a list of basic blocks, forming the control flow graph. Each basic block contains a list of instructions, and ends with a terminator instruction (e.g. branch).

Basic blocks are not represented by records. Rather, context is implicit. The first basic block begins with the first instruction record in the function block. Block boundaries are determined by terminator instructions. The instruction that follows a terminator instruction begins a new basic block.

The first basic block in a function is special in two ways: it is immediately executed on entrance to the function, and it is not allowed to have predecessor basic blocks (i.e. there can’t be any branches to the entry block of a function). Because the entry block has no predecessors, it also can’t have any phi instructions.

The parameters are implied by the type of the corresponding function address. One parameter is defined for each argument of the function type signature of the corresponding function address.

The number of basic blocks is defined by the count record. Each terminator instruction ends the current basic block, and the next instruction begins a new basic block. Basic blocks are numbered by the order they appear (starting with index 0). Basic block IDs have the form %bN, where N corresponds to the position of the basic block within the function block.

Each instruction, within a function block, corresponds to a corresponding PNaCl record. The layout of a function block is the (basic block) count record, followed by a sequence of instruction records.

For readability, PNaClAsm introduces basic block IDs. These basic block IDs do not correspond to PNaCl records, since basic block boundaries are defined implicitly, after terminator instructions. They appear only for readability.

Operands of instructions are defined using an absolute index. This absolute index implicitly encodes function addresses, global addresses, parameters, constants, and instructions that generate values. The encoding takes advantage of the implied ordering of these values in the bitcode file, defining a contiguous sequence of indices for each kind of identifier. That is, indices are ordered by putting function address identifiers first, followed by global address identifiers, followed by parameter identifiers, followed by constant identifiers, and lastly instruction value identifiers.

To save space in the encoded bitcode file, most operands are encoded using a relative index value, rather than absolute. This is done because most instruction operands refer to values defined earlier in the (same) basic block. As a result, the relative distance (back) from the next value defining instruction is frequently a small number. Small numbers tend to require fewer bits when they are converted to bit sequences.

Note that instructions that can appear in a function block are defined in sections Terminator Instructions, Integer Binary Instructions, Floating Point Binary Instructions, Memory Creation and Access Instructions, Conversion Instructions, Comparison Instructions, Vector Instructions, and Other Instructions.

The following subsections define the remaining records that can appear in a function block.

Function Enter

PNaClAsm defines a function enter block construct. The corresponding record is simply an enter block record, with BlockID value 12. All context about the defining address is implicit by the position of the function block, and the corresponding defining function address. To improve readability, PNaClAsm includes the function signature into the syntax rule.

Syntax:

function TR @fN ( T0 %p0, ... , TM %pM ) {             <B>

Record:

1: <65535, 12, B>

Semantics:

B is the number of bits reserved for abbreviations in the block. If it is omitted, 2 is assumed. See enter block records for more details.

The value of N corresponds to the positional index of the corresponding defining function address this block is associated with. M is the number of defined parameters (minus one) in the function heading.

Constraints:

N == NumFcnImpls &
@fN in DefiningFcnIDs &
TypeOfFcn(@fN) == TypeOf(TypeID(TR (T0, ... , TM)))

Updates:

++NumFcnImpls;
EnclosingFcnID = @fN;
NumBasicBlocks = 0;
ExpectedBlocks = 0;
NumParams = M;
for I in [0..M]:
  TypeOf(%pI) = TypeOf(TypeID(TI));

Examples:

 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 4>                |    count 4;
 50:4|    3: <7, 32>               |    @t0 = i32;
 53:6|    3: <2>                   |    @t1 = void;
 55:4|    3: <21, 0, 1>            |    @t2 = void ();
 58:6|    3: <21, 0, 0, 0>         |    @t3 = i32 (i32);
 62:6|  0: <65534>                 |  }
 ...
104:0|  1: <65535, 12, 2>          |  function void @f0() {
     |                             |                   // BlockID = 12
112:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
114:4|    3: <10>                  |    ret void;
116:2|  0: <65534>                 |  }
120:0|  1: <65535, 12, 2>          |  function i32 @f1(i32 %p0) {
     |                             |                   // BlockID = 12
128:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
130:4|    3: <10, 1>               |    ret i32 %p0;
133:0|  0: <65534>                 |  }

The count record, within a function block, defines the number of basic blocks used to define the function implementation. It must be the first record in the function block.

Syntax:

  blocks: N;                                    <A>
%b0:

Record:

AA: <1, N>

Semantics:

The count record defines the number N of basic blocks in the implemented function.

Constraints:

AA == AbbrevIndex(A) &
ExpectedBasicBlocks == N &
NumBasicBlocks == 0

Updates:

104:0|  1: <65535, 12, 2>          |  function void @f0() {
     |                             |                   // BlockID = 12
112:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
114:4|    3: <10>                  |    ret void;
116:2|  0: <65534>                 |  }
120:0|  1: <65535, 12, 2>          |  function i32 @f1(i32 %p0) {
     |                             |                   // BlockID = 12
128:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
130:4|    3: <10, 1>               |    ret i32 %p0;
133:0|  0: <65534>                 |  }

Terminator Instructions

Terminator instructions are instructions that appear in a function block, and define the end of the current basic block. A terminator instruction indicates which block should be executed after the current block is finished. The function block is well formed only if the number of terminator instructions, in the function block, corresponds to the value defined by the corresponding function basic block count record.

Note that any branch instruction to label %bN, where N >= ExpectedBasicBlocks, is illegal. For ease of readability, this constraint hasn’t been put on branch instructions. Rather it is only implied.

In addition, it must be the case that NumBasicBlocks < ExpectedBasicBlocks, and will not be listed as a constraint. Further, if B = NumBasicBlocks + 1 is the number associated with the next basic block. Label %bB: only appears if:

B < ExpectedBasicBlocks

That is, the label is omitted only if this terminator instruction is the last instruction in the function block.

Return Void Instruction

The return void instruction is used to return control from a function back to the caller, without returning any value.

Syntax:

  ret void;                                     <A>
%bB:

Record:

AA: <10>

Semantics:

The return void instruction returns control to the calling function.

Constraints:

AA == AbbrevIndex(A) &
B == NumBasicBlocks + 1 &
ReturnType(TypeOf(EnclosingFcnID)) == void

Updates:

++NumBasicBlocks;

Examples:

104:0|  1: <65535, 12, 2>          |  function void @f0() {
     |                             |                   // BlockID = 12
112:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
114:4|    3: <10>                  |    ret void;
116:2|  0: <65534>                 |  }

Return Value Instruction

The return value instruction is used to return control from a function back to the caller, including a value. The value must correspond to the return type of the enclosing function.

Syntax:

  ret T V;                                      <A>
%bB:

Record:

AA: <10, VV>

Semantics:

The return value instruction returns control to the calling function, returning the provided value.

V is the value to return. Type T must be of the type returned by the function. It must also be the type associated with value V.

The return type T must either be a (non-void) primitive type, or a vector type. If the function block is implementing an ordinary function, and the return type is an integer type, it must be either i32 or i64.

Constraints:

AA == AbbrevIndex(A) &
VV == RelativeIndex(V) &
B == NumBasicBlocks + 1 &
T == TypeOf(V) == ReturnType(TypeOf(EnclosingFcnID))

Updates:

++NumBasicBlocks;

Examples:

120:0|  1: <65535, 12, 2>          |  function i32 @f1(i32 %p0) {
     |                             |                   // BlockID = 12
128:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
130:4|    3: <10, 1>               |    ret i32 %p0;

Unconditional Branch Instruction

The unconditional branch instruction is used to cause control flow to transfer to a different basic block of the function.

Syntax:

  br %bN;                                       <A>
%bB:

Record:

AA: <11, N>

Semantics:

The unconditional branch instruction causes control flow to transfer to basic block N.

Constraints:

AA == AbbrevIndex(A) &
B == NumBasicBlocks + 1 &
0 < N &
N < ExpectedBasicBlocks

Updates:

++NumBasicBlocks;

Examples:

 88:0|  1: <65535, 12, 2>          |  function void @f0() {
     |                             |                   // BlockID = 12
 96:0|    3: <1, 5>                |    blocks 5;
     |                             |  %b0:
 98:4|    3: <11, 3>               |    br label %b3;
     |                             |  %b1:
101:0|    3: <11, 4>               |    br label %b4;
     |                             |  %b2:
103:4|    3: <11, 1>               |    br label %b1;
     |                             |  %b3:
106:0|    3: <11, 2>               |    br label %b2;
     |                             |  %b4:
108:4|    3: <10>                  |    ret void;
110:2|  0: <65534>                 |  }

Conditional Branch Instruction

The conditional branch instruction is used to cause control flow to transfer to a different basic block of the function, based on a boolean test condition.

Syntax:

  br i1 C, %bT, %bBF;                          <A>
%bB:

Record:

AA: <11, T, F, CC>

Semantics:

Upon execution of a conditional branch instruction, the i1 (boolean) argument C is evaluated. If the value is true, control flows to basic block %bT. Otherwise control flows to basic block %bF.

Constraints:

AA == AbbrevIndex(A) &
CC == RelativeIndex(C) &
B == NumBasicBlocks + 1 &
0 < T &
B1 < ExpectedBasicBlocks &
0 < F &
B2 < ExpectedBasicBlocks &
TypeOf(C) == i1

Updates:

++NumBasicBlocks;

Examples:

 92:0|  1: <65535, 12, 2>          |  function void @f0() {
     |                             |                   // BlockID = 12
100:0|    3: <1, 5>                |    blocks 5;
102:4|    1: <65535, 11, 2>        |    constants {  // BlockID = 11
112:0|      3: <1, 1>              |      i1:
114:4|      3: <4, 3>              |        %c0 = i1 1;
117:0|      3: <4, 0>              |        %c1 = i1 0;
119:4|    0: <65534>               |      }
     |                             |  %b0:
120:0|    3: <11, 3>               |    br label %b3;
     |                             |  %b1:
122:4|    3: <11, 2, 4, 2>         |    br i1 %c0, label %b2, label %b4;
     |                             |  %b2:
126:4|    3: <11, 3>               |    br label %b3;
     |                             |  %b3:
129:0|    3: <10>                  |    ret void;
     |                             |  %b4:
130:6|    3: <11, 2, 3, 1>         |    br i1 %c1, label %b2, label %b3;
134:6|  0: <65534>                 |  }

Unreachable

The unreachable instruction has no defined semantics. The instruction is used to inform the PNaCl translator that control can’t reach this instruction.

Syntax:

  unreachable;                                  <A>
%bB:

Record:

AA: <15>

Semantics:

Directive to the PNaCl translator that this instruction is unreachable.

Constraints:

AA == AbbrevIndex(A)
B == NumBasicBlocks + 1 &

Updates:

++NumBasicBlocks;

Examples:

108:0|  1: <65535, 12, 2>          |  function void @f0(i32 %p0) {
     |                             |                   // BlockID = 12
116:0|    3: <1, 5>                |    blocks 5;
118:4|    1: <65535, 11, 2>        |    constants {  // BlockID = 11
128:0|      3: <1, 2>              |      i1:
130:4|      3: <4, 3>              |        %c0 = i1 1;
133:0|      3: <4, 0>              |        %c1 = i1 0;
135:4|    0: <65534>               |      }
     |                             |  %b0:
136:0|    3: <11, 1, 2, 2>         |    br i1 %c0, label %b1, label %b2;
     |                             |  %b1:
140:0|    3: <11, 3, 4, 1>         |    br i1 %c1, label %b3, label %b4;
     |                             |  %b2:
144:0|    3: <15>                  |    unreachable;
     |                             |  %b3:
145:6|    3: <15>                  |    unreachable;
     |                             |  %b4:
147:4|    3: <10>                  |    ret void;
149:2|  0: <65534>                 |  }

Switch Instruction

The switch instruction transfers control flow to one of several different places, based on a selector value. It is a generalization of the conditional branch instruction.

Syntax:

  switch T V0 {
    default: br label %bB0;
    T V1:    br label %bB1;
    ...
    T VN:    br label %bBN;
  }                                             <A>
%bB:

Record:

AA: <12, TT, B0, N, (1, 1, VVI, BI | 1 <= i <= N)>

Semantics:

The switch instruction transfers control to a basic block in B0 through BN. Value V is used to conditionally select which block to branch to. T is the type of V and V1 through VN, and must be an integer type. Value V1 through VN are integers to compare against V. If selector V matches VI (for some I, 1 <= I <= N), then the instruction branches to block BI. If V is not in V1 through VN, the instruction branches to block B0.

Constraints:

AA == AbbrevIndex(A) &
B == NumBasicBlocks + 1 &
TT == TypeID(T) &
VI == SignRotate(VI) for all I, 1 <= I <= N &

Updates:

++NumBasicBlocks;

Examples:

116:0|  1: <65535, 12, 2>          |  function void @f0(i32 %p0) {
     |                             |                   // BlockID = 12
124:0|    3: <1, 6>                |    blocks 6;
     |                             |  %b0:
126:4|    3: <12, 1, 1, 2, 4, 1, 1,|    switch i32 %p0 {
     |        2, 3, 1, 1, 4, 3, 1, |      default: br label %b2;
     |        1, 8, 4, 1, 1, 10, 4>|      i32 1: br label %b3;
     |                             |      i32 2: br label %b3;
     |                             |      i32 4: br label %b4;
     |                             |      i32 5: br label %b4;
     |                             |    }
     |                             |  %b1:
143:2|    3: <11, 5>               |    br label %b5;
     |                             |  %b2:
145:6|    3: <11, 5>               |    br label %b5;
     |                             |  %b3:
148:2|    3: <11, 5>               |    br label %b5;
     |                             |  %b4:
150:6|    3: <11, 5>               |    br label %b5;
     |                             |  %b5:
153:2|    3: <10>                  |    ret void;
155:0|  0: <65534>                 |  }
156:0|  1: <65535, 12, 2>          |  function void @f1(i64 %p0) {
     |                             |                   // BlockID = 12
164:0|    3: <1, 6>                |    blocks 6;
     |                             |  %b0:
166:4|    3: <12, 2, 1, 2, 4, 1, 1,|    switch i64 %p0 {
     |        2, 3, 1, 1, 4, 3, 1, |      default: br label %b2;
     |        1, 8, 4, 1, 1,       |      i64 1: br label %b3;
     |        39777555332, 4>      |      i64 2: br label %b3;
     |                             |      i64 4: br label %b4;
     |                             |      i64 19888777666: br label %b4;
     |                             |    }
     |                             |  %b1:
188:4|    3: <11, 5>               |    br label %b5;
     |                             |  %b2:
191:0|    3: <11, 5>               |    br label %b5;
     |                             |  %b3:
193:4|    3: <11, 5>               |    br label %b5;
     |                             |  %b4:
196:0|    3: <11, 5>               |    br label %b5;
     |                             |  %b5:
198:4|    3: <10>                  |    ret void;
200:2|  0: <65534>                 |  }

Integer Binary Instructions

Binary instructions are used to do most of the computation in a program. This section focuses on binary instructions that operator on integer values, or vectors of integer values.

All binary operations require two operands of the same type, execute an operation on them, and produce a value. The value may represent multiple values if the type is a vector type. The result value always has the same type as its operands.

Some integer binary operations can be applied to both signed and unsigned integers. Others, the sign is significant. In general, if the sign plays a role in the instruction, the sign information is encoded into the name of the instruction.

For most binary operations (except some of the logical operations), integer type i1 is disallowed.

Integer Add

The integer add instruction returns the sum of its two arguments. Both arguments and the result must be of the same type. That type must be integer, or an integer vector type.

Syntax:

%vN = add T V1, V2;                             <A>

Record:

AA: <2, VV1, VV2, 0>

Semantics:

The integer add instruction returns the sum of its two arguments. Arguments V1 and V2, and the result %vN, must be of type T. T must be an integer type, or an integer vector type. N is defined by the record position, defining the corresponding value generated by the instruction.

The result returned is the mathematical result modulo 2n, where n is the bit width of the integer result.

Because integers are assumed to use a two’s complement representation, this instruction is appropriate for both signed and unsigned integers.

In the add instruction, integer type i1 (and a vector of integer type i1) is disallowed.

Constraints:

AA == AbbrevIndex(A) &
VV1 == RelativeIndex(V1) &
VV2 == RelativeIndex(V2) &
T == TypeOf(V1) == TypeOf(V2) &
IsInteger(UnderlyingType(T)) &
UnderlyingType(T) != i1 &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T

Examples:

 96:0|  1: <65535, 12, 2>          |  function i32 @f0(i32 %p0, i32 %p1) {
     |                             |                   // BlockID = 12
104:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
106:4|    3: <2, 2, 1, 0>          |    %v0 = add i32 %p0, %p1;
110:4|    3: <2, 3, 1, 0>          |    %v1 = add i32 %p0, %v0;
114:4|    3: <10, 1>               |    ret i32 %v1;
117:0|  0: <65534>                 |  }

Integer Subtract

The integer subtract instruction returns the difference of its two arguments. Both arguments and the result must be of the same type. That type must be integer, or an integer vector type.

Note: Since there isn’t a negate instruction, subtraction from constant zero should be used to negate values.

Syntax:

%vN = sub T V1, V2;                             <A>

Record:

AA: <2, VV1, VV2, 1>

Semantics:

The integer subtract returns the difference of its two arguments. Arguments V1 and V2, and the result %vN must be of type T. T must be an integer type, or an integer vector type. N is defined by the record position, defining the corresponding value generated by the instruction.

The result returned is the mathematical result modulo 2n, where n is the bit width of the integer result.

Because integers are assumed to use a two’s complement representation, this instruction is appropriate for both signed and unsigned integers.

In the subtract instruction, integer type i1 (and a vector of integer type i1) is disallowed.

Constraints:

AA == AbbrevIndex(A) &
VV1 == RelativeIndex(V1) &
VV2 == RelativeIndex(V2) &
T == TypeOf(V1) == TypeOf(V2) &
IsInteger(UnderlyingType(T)) &
UnderlyingType(T) != i1 &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T

Examples:

 96:0|  1: <65535, 12, 2>          |  function i32 @f0(i32 %p0, i32 %p1) {
     |                             |                   // BlockID = 12
104:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
106:4|    3: <2, 2, 1, 1>          |    %v0 = sub i32 %p0, %p1;
110:4|    3: <2, 3, 1, 1>          |    %v1 = sub i32 %p0, %v0;
114:4|    3: <10, 1>               |    ret i32 %v1;
117:0|  0: <65534>                 |  }

Integer Multiply

The integer multiply instruction returns the product of its two arguments. Both arguments and the result must be of the same type. That type must be integer, or an integer based vector type.

Syntax:

&vN = mul T V1, V2;                             <A>

Record:

AA: <2, VV1, VV2, 2>

Semantics:

The integer multiply instruction returns the product of its two arguments. Arguments V1 and V2, and the result %vN, must be of type T. T must be an integer type, or an integer vector type. N is defined by the record position, defining the corresponding value generated by the instruction.

The result returned is the mathematical result modulo 2n, where n is the bit width of the integer result.

Because integers are assumed to use a two’s complement representation, this instruction is appropriate for both signed and unsigned integers.

In the subtract instruction, integer type i1 (or a vector on integer type i1) is disallowed.

Constraints:

AA == AbbrevIndex(A) &
VV1 == RelativeIndex(V1) &
VV2 == RelativeIndex(V2) &
T == TypeOf(V1) == TypeOf(V2) &
IsInteger(UnderlyingType(T)) &
UnderlyingType(T) != i1 &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T

Examples:

 96:0|  1: <65535, 12, 2>          |  function i32 @f0(i32 %p0, i32 %p1) {
     |                             |                   // BlockID = 12
104:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
106:4|    3: <2, 2, 1, 2>          |    %v0 = mul i32 %p0, %p1;
110:4|    3: <2, 1, 3, 2>          |    %v1 = mul i32 %v0, %p0;
114:4|    3: <10, 1>               |    ret i32 %v1;
117:0|  0: <65534>                 |  }

Signed Integer Divide

The signed integer divide instruction returns the quotient of its two arguments. Both arguments and the result must be of the same type. That type must be integer, or an integer vector type.

Syntax:

%vN = sdiv T V1, V2;                             <A>

Record:

AA: <2, VV1, VV2, 4>

Semantics:

The signed integer divide instruction returns the quotient of its two arguments. Arguments V1 and V2, and the result %vN, must be of type T. T must be a integer type, or an integer vector type. N is defined by the record position, defining the corresponding value generated by the instruction.

Signed values are assumed. Note that signed and unsigned integer division are distinct operations. For unsigned integer division use the unsigned integer divide instruction (udiv).

In the signed integer divide instruction, integer type i1 (and a vector of integer type i1) is disallowed. Integer division by zero is guaranteed to trap.

Note that overflow can happen with this instruction when dividing the maximum negative integer by -1. The behavior for this case is currently undefined.

Constraints:

AA == AbbrevIndex(A) &
VV1 == RelativeIndex(V1) &
VV2 == RelativeIndex(V2) &
T == TypeOf(V1) == TypeOf(V2) &
IsInteger(UnderlyingType(T)) &
UnderlyingType(T) != i1 &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T

Examples:

 96:0|  1: <65535, 12, 2>          |  function i32 @f0(i32 %p0, i32 %p1) {
     |                             |                   // BlockID = 12
104:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
106:4|    3: <2, 2, 1, 4>          |    %v0 = sdiv i32 %p0, %p1;
110:4|    3: <2, 1, 2, 4>          |    %v1 = sdiv i32 %v0, %p1;
114:4|    3: <10, 1>               |    ret i32 %v1;
117:0|  0: <65534>                 |  }

Unsigned Integer Divide

The unsigned integer divide instruction returns the quotient of its two arguments. Both the arguments and the result must be of the same type. That type must be integer, or an integer vector type.

Syntax:

%vN = udiv T V1, V2;                            <a>

Record:

AA: <2, A1, A2, 3>

Semantics:

The unsigned integer divide instruction returns the quotient of its two arguments. Arguments V1 and V2, and the result %vN, must be of type T. T must be an integer type, or an integer vector type. N is defined by the record position, defining the corresponding value generated by the instruction.

Unsigned integer values are assumed. Note that signed and unsigned integer division are distinct operations. For signed integer division use the signed integer divide instruction (sdiv).

In the unsigned integer divide instruction, integer type i1 (and a vector of integer type i1) is disallowed. Division by zero is guaranteed to trap.

Constraints:

AA == AbbrevIndex(A) &
VV1 == RelativeIndex(V1) &
VV2 == RelativeIndex(V2) &
T == TypeOf(V1) == TypeOf(V2) &
IsInteger(UnderlyingType(T)) &
UnderlyingType(T) != i1 &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T

Examples:

 96:0|  1: <65535, 12, 2>          |  function i32 @f0(i32 %p0, i32 %p1) {
     |                             |                   // BlockID = 12
104:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
106:4|    3: <2, 2, 1, 3>          |    %v0 = udiv i32 %p0, %p1;
110:4|    3: <2, 1, 2, 3>          |    %v1 = udiv i32 %v0, %p1;
114:4|    3: <10, 1>               |    ret i32 %v1;
117:0|  0: <65534>                 |  }

Signed Integer Remainder

The signed integer remainder instruction returns the remainder of the quotient of its two arguments. Both arguments and the result must be of the same type. That type must be integer, or an integer based vector type.

Syntax:

%vN = srem T V1, V2;                             <A>

Record:

AA: <2, VV1, VV2, 6>

Semantics:

The signed integer remainder instruction returns the remainder of the quotient of its two arguments. Arguments V1 and V2, and the result %vN, must be of type T. T must be a integer type, or an integer vector type. N is defined by the record position, defining the corresponding value generated by the instruction.

Signed values are assumed. Note that signed and unsigned integer division are distinct operations. For unsigned integer division use the unsigned integer remainder instruction (urem).

In the signed integer remainder instruction, integer type i1 (and a vector of integer type i1) is disallowed. Division by zero is guaranteed to trap.

Note that overflow can happen with this instruction when dividing the maximum negative integer by -1. The behavior for this case is currently undefined.

Constraints:

AA == AbbrevIndex(A) &
VV1 == RelativeIndex(V1) &
VV2 == RelativeIndex(V2) &
T == TypeOf(V1) == TypeOf(V2) &
IsInteger(UnderlyingType(T)) &
UnderlyingType(T) != i1 &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T

Examples:

 96:0|  1: <65535, 12, 2>          |  function i32 @f0(i32 %p0, i32 %p1) {
     |                             |                   // BlockID = 12
104:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
106:4|    3: <2, 2, 1, 6>          |    %v0 = srem i32 %p0, %p1;
110:4|    3: <2, 1, 2, 6>          |    %v1 = srem i32 %v0, %p1;
114:4|    3: <10, 1>               |    ret i32 %v1;
117:0|  0: <65534>                 |  }

Unsigned Integer Remainder Instruction

The unsigned integer remainder instruction returns the remainder of the quotient of its two arguments. Both the arguments and the result must be of the same type. The type must be integer, or an integer vector type.

Syntax:

%vN = urem T V1, V2;                            <A>

Record:

AA: <2, A1, A2, 5>

Semantics:

The unsigned integer remainder instruction returns the remainder of the quotient of its two arguments. Arguments V1 and V2, and the result %vN, must be of type T. T must be an integer type, or an integer vector type. N is defined by the record position, defining the corresponding value generated by the instruction.

Unsigned values are assumed. Note that signed and unsigned integer division are distinct operations. For signed integer division use the remainder instruction (srem).

In the unsigned integer remainder instruction, integer type i1 (and a vector of integer type i1) is disallowed. Division by zero is guaranteed to trap.

Constraints:

AA == AbbrevIndex(A) &
VV1 == RelativeIndex(V1) &
VV2 == RelativeIndex(V2) &
T == TypeOf(V1) == TypeOf(V2) &
IsInteger(UnderlyingType(T)) &
UnderlyingType(T) != i1 &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T

Examples:

 96:0|  1: <65535, 12, 2>          |  function i32 @f0(i32 %p0, i32 %p1) {
     |                             |                   // BlockID = 12
104:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
106:4|    3: <2, 2, 1, 5>          |    %v0 = urem i32 %p0, %p1;
110:4|    3: <2, 1, 2, 5>          |    %v1 = urem i32 %v0, %p1;
114:4|    3: <10, 1>               |    ret i32 %v1;
117:0|  0: <65534>                 |  }

Shift Left

The (integer) shift left instruction returns the first operand, shifted to the left a specified number of bits with zero fill. The shifted value must be integer, or an integer vector type.

Syntax:

%vN = shl T V1, V2;                             <A>

Record:

AA: <2, VV1, VV2, 7>

Semantics:

This instruction performs a shift left operation. Arguments V1 and V2 and the result %vN must be of type T. T must be an integer, or a vector of integers. N is defined by the record position, defining the corresponding value generated by the instruction.

V2 is assumed to be unsigned. The least significant bits of the result will be filled with zero bits after the shift. If V2 is (statically or dynamically) negative or equal to or larger than the number of bits in V1, the result is undefined. If the arguments are vectors, each vector element of V1 is shifted by the corresponding shift amount in V2.

In the shift left instruction, integer type i1 (and a vector of integer type i1) is disallowed.

Constraints:

AA == AbbrevIndex(A) &
VV1 == RelativeIndex(V1) &
VV2 == RelativeIndex(V2) &
T == TypeOf(V1) == TypeOf(V2) &
IsInteger(UnderlyingType(T)) &
UnderlyingType(T) != i1 &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T

Examples:

 96:0|  1: <65535, 12, 2>          |  function i32 @f0(i32 %p0, i32 %p1) {
     |                             |                   // BlockID = 12
104:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
106:4|    3: <2, 2, 1, 7>          |    %v0 = shl i32 %p0, %p1;
110:4|    3: <2, 1, 2, 7>          |    %v1 = shl i32 %v0, %p1;
114:4|    3: <10, 1>               |    ret i32 %v1;
117:0|  0: <65534>                 |  }

Logical Shift Right

The logical shift right instruction returns the first operand, shifted to the right a specified number of bits with zero fill.

Syntax:

%vN = lshr T V1, V2;                            <A>

Record:

AA: <2, VV1, VV2, 8>

Semantics:

This instruction performs a logical shift right operation. Arguments V1 and V2 and the result %vN must be of type T. T must be an integer, or a vector of integers. N is defined by the record position, defining the corresponding value generated by the instruction.

V2 is assumed to be unsigned. The most significant bits of the result will be filled with zero bits after the shift. If V2 is (statically or dynamically) negative or equal to or larger than the number of bits in V1, the result is undefined. If the arguments are vectors, each vector element of V1 is shifted by the corresponding shift amount in V2.

In the logical shift right instruction, integer type i1 (and a vector of integer type i1) is disallowed.

Constraints:

AA == AbbrevIndex(A) &
VV1 == RelativeIndex(V1) &
VV2 == RelativeIndex(V2) &
T == TypeOf(V1) == TypeOf(V2) &
IsInteger(UnderlyingType(T)) &
UnderlyingType(T) != i1 &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T

Examples:

 96:0|  1: <65535, 12, 2>          |  function i32 @f0(i32 %p0, i32 %p1) {
     |                             |                   // BlockID = 12
104:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
106:4|    3: <2, 2, 1, 8>          |    %v0 = lshr i32 %p0, %p1;
110:4|    3: <2, 1, 2, 8>          |    %v1 = lshr i32 %v0, %p1;
114:4|    3: <10, 1>               |    ret i32 %v1;
117:0|  0: <65534>                 |  }

Arithmetic Shift Right

The arithmetic shift right instruction returns the first operand, shifted to the right a specified number of bits with sign extension.

Syntax:

%vN = ashr T V1, V2;                            <A>

Record:

AA: <2, VV1, VVA2, 9>

Semantics:

This instruction performs an arithmetic shift right operation. Arguments V1 and V2 and and the result %vN must be of type T. T must be an integer, or a vector of integers. N is defined by the record position, defining the corresponding value generated by the instruction.

V2 is assumed to be unsigned. The most significant bits of the result will be filled with the sign bit of V1. If V2 is (statically or dynamically) negative or equal to or larger than the number of bits in V1, the result is undefined. If the arguments are vectors, each vector element of V1 is shifted by the corresponding shift amount in V2.

In the arithmetic shift right instruction, integer type i1 (and a vector of integral type i1) is disallowed.

Constraints:

AA == AbbrevIndex(A) &
VV1 == RelativeIndex(V1) &
VV2 == RelativeIndex(V2) &
T == TypeOf(V1) == TypeOf(V2) &
IsInteger(UnderlyingType(T)) &
UnderlyingType(T) != i1 &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T

Examples:

 96:0|  1: <65535, 12, 2>          |  function i32 @f0(i32 %p0, i32 %p1) {
     |                             |                   // BlockID = 12
104:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
106:4|    3: <2, 2, 1, 9>          |    %v0 = ashr i32 %p0, %p1;
110:4|    3: <2, 1, 2, 9>          |    %v1 = ashr i32 %v0, %p1;
114:4|    3: <10, 1>               |    ret i32 %v1;
117:0|  0: <65534>                 |  }

Logical And

The and instruction returns the bitwise logical and of its two operands.

Syntax:

%vN = and T V1, V2;                             <A>

Record:

AA: <2, VV1, VV2, 10>

Semantics:

This instruction performs a bitwise logical and of its arguments. Arguments V1 and V2, and the result %vN must be of type T. T must be an integer, or a vector of integers. N is defined by the record position, defining the corresponding value generated by the instruction. A is the (optional) abbreviation associated with the corresponding record.

The truth table used for the and instruction is:

Arg 1Arg 2Result
000
010
100
111

Constraints:

AA == AbbrevIndex(A) &
VV1 == RelativeIndex(V1) &
VV2 == RelativeIndex(V2) &
T == TypeOf(V1) == TypeOf(V2) &
IsInteger(UnderlyingType(T))) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T

Examples:

 96:0|  1: <65535, 12, 2>          |  function i32 @f0(i32 %p0, i32 %p1) {
     |                             |                   // BlockID = 12
104:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
106:4|    3: <2, 2, 1, 10>         |    %v0 = and i32 %p0, %p1;
110:4|    3: <2, 1, 2, 10>         |    %v1 = and i32 %v0, %p1;
114:4|    3: <10, 1>               |    ret i32 %v1;
117:0|  0: <65534>                 |  }

Logical Or

The or instruction returns the bitwise logical inclusive or of its two operands.

Syntax:

%vN = or T V1, V2;                              <A>

Record:

AA: <2, VV1, VV2, 11>

Semantics:

This instruction performs a bitwise logical inclusive or of its arguments. Arguments V1 and V2, and the result %vN must be of type T. T must be an integer, or a vector of integers. N is defined by the record position, defining the corresponding value generated by the instruction.

The truth table used for the or instruction is:

Arg 1Arg 2Result
000
011
101
111

Constraints:

AA == AbbrevIndex(A) &
VV1 == RelativeIndex(V1) &
VV2 == RelativeIndex(V2) &
T == TypeOf(V1) == TypeOf(V2) &
IsInteger(UnderlyingType(T))) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T

Examples:

 96:0|  1: <65535, 12, 2>          |  function i32 @f0(i32 %p0, i32 %p1) {
     |                             |                   // BlockID = 12
104:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
106:4|    3: <2, 2, 1, 11>         |    %v0 = or i32 %p0, %p1;
110:4|    3: <2, 1, 2, 11>         |    %v1 = or i32 %v0, %p1;
114:4|    3: <10, 1>               |    ret i32 %v1;
117:0|  0: <65534>                 |  }

Logical Xor

The xor instruction returns the bitwise logical exclusive or of its two operands.

Syntax:

%vN = xor T V1, V2;                             <A>

Record:

AA: <2, VV1, VV2, 12>

Semantics:

This instruction performs a bitwise logical exclusive or of its arguments. Arguments V1 and V2, and the result %vN must be of type T. T must be an integer, or a vector of integers. N is defined by the record position, defining the corresponding value generated by the instruction.

The truth table used for the xor instruction is:

Arg 1Arg 2Result
000
011
101
110

Constraints:

AA == AbbrevIndex(A) &
A1 == RelativeIndex(V1) &
A2 == RelativeIndex(V2) &
T == TypeOf(V1) == TypeOf(V2) &
IsInteger(UnderlyingType(T))) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T

Examples:

 96:0|  1: <65535, 12, 2>          |  function i32 @f0(i32 %p0, i32 %p1) {
     |                             |                   // BlockID = 12
104:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
106:4|    3: <2, 2, 1, 12>         |    %v0 = xor i32 %p0, %p1;
110:4|    3: <2, 1, 2, 12>         |    %v1 = xor i32 %v0, %p1;
114:4|    3: <10, 1>               |    ret i32 %v1;
117:0|  0: <65534>                 |  }

Floating Point Binary Instructions

Floating point binary instructions require two operands of the same type, execute an operation on them, and produce a value. The value may represent multiple values if the type is a vector type. The result value always has the same type as its operands.

Floating Point Add

The floating point add instruction returns the sum of its two arguments. Both arguments and the result must be of the same type. That type must be a floating point type, or a vector of a floating point type.

Syntax:

%vN = fadd T V1, V2;                            <A>

Record:

AA: <2, VV1, VV2, 0>

Semantics:

The floating point add instruction returns the sum of its two arguments. Arguments V1 and V2 and the result %vN must be of type T. T must be a floating point type, or a vector of a floating point type. N is defined by the record position, defining the corresponding value generated by the instruction.

Constraints:

AA == AbbrevIndex(A) &
VV1 == RelativeIndex(V1) &
VV2 == RelativeIndex(V2) &
T == TypeOf(V1) == TypeOf(V2) &
IsFloat(UnderlyingType(T)) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T

Examples:

 92:0|  1: <65535, 12, 2>          |  function
     |                             |      float @f0(float %p0, float %p1) {
     |                             |                    // BlockID = 12
100:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
102:4|    3: <2, 2, 1, 0>          |    %v0 = fadd float %p0, %p1;
106:4|    3: <2, 3, 1, 0>          |    %v1 = fadd float %p0, %v0;
110:4|    3: <10, 1>               |    ret float %v1;
113:0|  0: <65534>                 |  }

Floating Point Subtract

The floating point subtract instruction returns the difference of its two arguments. Both arguments and the result must be of the same type. That type must be a floating point type, or a vector of a floating point type.

Syntax:

%vN = fsub T V1, V2;                            <a>

Record:

AA: <2, VV1, VV2, 1>

Semantics:

The floating point subtract instruction returns the difference of its two arguments. Arguments V1 and V2, and the result %vN must be of type T. T must be a floating point type, or a vector of a floating point type. N is defined by the record position, defining the corresponding value generated by the instruction.

Constraints:

AA == AbbrevIndex(A) &
VV1 == RelativeIndex(V1) &
VV2 == RelativeIndex(V2) &
T == TypeOf(V1) == TypeOf(V2) &
IsFloat(UnderlyingType(T)) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T

Examples:

 92:0|  1: <65535, 12, 2>          |  function
     |                             |      float @f0(float %p0, float %p1) {
     |                             |                    // BlockID = 12
100:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
102:4|    3: <2, 2, 1, 1>          |    %v0 = fsub float %p0, %p1;
106:4|    3: <2, 3, 1, 1>          |    %v1 = fsub float %p0, %v0;
110:4|    3: <10, 1>               |    ret float %v1;
113:0|  0: <65534>                 |  }

Floating Point Multiply

The floating point multiply instruction returns the product of its two arguments. Both arguments and the result must be of the same type. That type must be a floating point type, or a vector of a floating point type.

Syntax:

&vN = fmul T V1, V2;                            <A>

Record:

AA: <2, VV1, VV2, 2>

Semantics:

The floating point multiply instruction returns the product of its two arguments. Arguments V1 and V2, and the result %vN must be of type T. T must be a floating point type, or a vector of a floating point type. N is defined by the record position, defining the corresponding value generated by the instruction.

Constraints:

AA == AbbrevIndex(A) &
VV1 == RelativeIndex(V1) &
VV2 == RelativeIndex(V2) &
T == TypeOf(V1) == TypeOf(V2) &
IsFloat(UnderlyingType(T)) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T

Examples:

 92:0|  1: <65535, 12, 2>          |  function
     |                             |      float @f0(float %p0, float %p1) {
     |                             |                    // BlockID = 12
100:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
102:4|    3: <2, 2, 1, 2>          |    %v0 = fmul float %p0, %p1;
106:4|    3: <2, 3, 1, 2>          |    %v1 = fmul float %p0, %v0;
110:4|    3: <10, 1>               |    ret float %v1;
113:0|  0: <65534>                 |  }

Floating Point Divide

The floating point divide instruction returns the quotient of its two arguments. Both arguments and the result must be of the same type. That type must be a floating point type, or a vector of a floating point type.

Syntax:

%vN = fdiv T V1, V2;                            <A>

Record:

AA: <2, V1, V2, 4>

Semantics:

The floating point divide instruction returns the quotient of its two arguments. Arguments V1 and V2, and the result %vN must be of type T. T must be a floating point type, or a vector of a floating point type. N is defined by the record position, defining the corresponding value generated by the instruction.

Constraints:

AA == AbbrevIndex(A) &
VV1 == RelativeIndex(V1) &
VV22 == RelativeIndex(V2) &
T == TypeOf(V1) == TypeOf(V2) &
IsFloat(UnderlyingType(T)) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T;

Examples:

 92:0|  1: <65535, 12, 2>          |  function
     |                             |      double
     |                             |      @f0(double %p0, double %p1) {
     |                             |                   // BlockID = 12
100:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
102:4|    3: <2, 2, 1, 4>          |    %v0 = fdiv double %p0, %p1;
106:4|    3: <2, 3, 1, 4>          |    %v1 = fdiv double %p0, %v0;
110:4|    3: <10, 1>               |    ret double %v1;
113:0|  0: <65534>                 |  }

Floating Point Remainder

The floating point remainder instruction returns the remainder of the quotient of its two arguments. Both arguments and the result must be of the same type. That type must be a floating point type, or a vector of a floating point type.

Syntax:

%vN = frem T V1, V2;                            <A>

Record:

AA: <2, VV1, VV2, 6>

Semantics:

The floating point remainder instruction returns the remainder of the quotient of its two arguments. Arguments V1 and V2, and the result %vN must be of type T. T must be a floating point type, or a vector of a floating point type. N is defined by the record position, defining the corresponding value generated by the instruction.

Constraints:

AA == AbbrevIndex(A) &
VV1 == RelativeIndex(V1) &
VV2 == RelativeIndex(V2) &
T == TypeOf(V1) == TypeOf(V2)  &
IsFloat(UnderlyingType(T)) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T

Examples:

 92:0|  1: <65535, 12, 2>          |  function
     |                             |      double
     |                             |      @f0(double %p0, double %p1) {
     |                             |                   // BlockID = 12
100:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
102:4|    3: <2, 2, 1, 6>          |    %v0 = frem double %p0, %p1;
106:4|    3: <2, 3, 1, 6>          |    %v1 = frem double %p0, %v0;
110:4|    3: <10, 1>               |    ret double %v1;
113:0|  0: <65534>                 |  }

Memory Creation and Access Instructions

A key design point of SSA-based representation is how it represents memory. In PNaCl bitcode files, no memory locations are in SSA form. This makes things very simple.

Alloca Instruction

The alloca instruction allocates memory on the stack frame of the currently executing function. This memory is automatically released when the function returns to its caller.

Syntax:

%vN = alloca i8, i32 S, align V;                <A>

Record:

AA: <19, SS, VV>

Semantics:

The alloca instruction allocates memory on the stack frame of the currently executing function. The resulting value is a pointer to the allocated memory (i.e. of type i32). S is the number of bytes that are allocated on the stack. S must be of integer type i32. V is the alignment of the generated stack address.

Alignment must be a power of 2. See memory blocks and alignment for a more detailed discussion on how to define alignment.

Constraints:

AA == AbbrevIndex(A) &
VV == Log2(V+1) &
SS == RelativeIndex(S) &
i32 == TypeOf(S) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = i32;

Examples:

112:0|  1: <65535, 12, 2>          |  function void @f1() {
     |                             |                   // BlockID = 12
120:0|    3: <1, 1>                |    blocks 1;
122:4|    1: <65535, 11, 2>        |    constants {  // BlockID = 11
132:0|      3: <1, 0>              |      i32:
134:4|      3: <4, 4>              |        %c0 = i32 2;
137:0|      3: <4, 8>              |        %c1 = i32 4;
139:4|      3: <4, 16>             |        %c2 = i32 8;
142:0|    0: <65534>               |      }
     |                             |  %b0:
144:0|    3: <19, 3, 1>            |    %v0 = alloca i8, i32 %c0, align 1;
147:2|    3: <19, 3, 3>            |    %v1 = alloca i8, i32 %c1, align 4;
150:4|    3: <19, 3, 4>            |    %v2 = alloca i8, i32 %c2, align 8;
153:6|    3: <10>                  |    ret void;
155:4|  0: <65534>                 |  }

Load Instruction

The load instruction is used to read from memory.

Syntax:

%vN = load T* P, align V;                       <A>

Record:

AA: <20, PP, VV, TT>

Semantics:

The load instruction is used to read from memory. P is the identifier of the memory address to read. The type of P must be an i32. T is the type of value to read. V is the alignment of the memory address.

Type T must be a vector, integer, or floating point type. Both float and double types are allowed for floating point types. All integer types except i1 are allowed.

Alignment must be a power of 2. See memory blocks and alignment for a more detailed discussion on how to define alignment.

Constraints:

AA == AbbrevIndex(A) &
i32 == TypeOf(P) &
PP == RelativeIndex(P) &
VV == Log2(V+1) &
%tTT == TypeID(T) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T;

Examples:

 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 4>                |    count 4;
 50:4|    3: <7, 32>               |    @t0 = i32;
 53:6|    3: <2>                   |    @t1 = void;
 55:4|    3: <4>                   |    @t2 = double;
 57:2|    3: <21, 0, 1, 0>         |    @t3 = void (i32);
 61:2|  0: <65534>                 |  }
 ...
 96:0|  1: <65535, 12, 2>          |  function void @f0(i32 %p0) {
     |                             |                   // BlockID = 12
104:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
106:4|    3: <20, 1, 1, 0>         |    %v0 = load i32* %p0, align 1;
110:4|    3: <20, 1, 4, 2>         |    %v1 = load double* %v0, align 8;
114:4|    3: <10>                  |    ret void;
116:2|  0: <65534>                 |  }

Store Instruction

The store instruction is used to write to memory.

Syntax:

store T S, T* P, align V;                     <A>

Record:

AA: <24, PP, SS, VV>

Semantics:

The store instruction is used to write to memory. P is the identifier of the memory address to write to. The type of P must be an i32 integer. T is the type of value to store. S is the value to store, and must be of type T. V is the alignment of the memory address. A is the (optional) abbreviation index associated with the record.

Type T must be an integer or floating point type. Both float and double types are allowed for floating point types. All integer types except i1 are allowed.

Alignment must be a power of 2. See memory blocks and alignment for a more detailed discussion on how to define alignment.

Constraints:

AA == AbbrevIndex(A) &
i32 == TypeOf(P) &
PP == RelativeIndex(P) &
VV == Log2(V+1)

Examples:

 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 4>                |    count 4;
 50:4|    3: <7, 32>               |    @t0 = i32;
 53:6|    3: <2>                   |    @t1 = void;
 55:4|    3: <4>                   |    @t2 = double;
 57:2|    3: <21, 0, 1, 0, 0, 0, 2>|    @t3 = void (i32, i32, i32, double);
 63:4|  0: <65534>                 |  }
 ...
 96:0|  1: <65535, 12, 2>          |  function
     |                             |      void
     |                             |      @f0(i32 %p0, i32 %p1, i32 %p2,
     |                             |          double %p3) {
     |                             |                   // BlockID = 12
104:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
106:4|    3: <24, 4, 3, 1>         |    store i32 %p1, i32* %p0, align 1;
110:4|    3: <24, 2, 1, 4>         |    store double %p3, double* %p2,
     |                             |        align 8;
114:4|    3: <10>                  |    ret void;
116:2|  0: <65534>                 |  }

Conversion Instructions

Conversion instructions all take a single operand and a type. The value is converted to the corresponding type.

Integer Truncating Instruction

The integer truncating instruction takes a value to truncate, and a type defining the truncated type. Both types must be integer types, or integer vectors with the same number of elements. The bit size of the value must be larger than the bit size of the destination type. Equal sized types are not allowed.

Syntax:

%vN = trunc T1 V to T2;                         <A>

Record:

AA: <3, VV, TT2, 0>

Semantics:

The integer truncating instruction takes a value V, and truncates to type T2. Both T1 and T2 must be integer types, or integer vectors with the same number of elements. T1 has to be wider than T2. If the value doesn’t fit in in T2, then the higher order bits are dropped.

Constraints:

AA == AbbrevIndex(A) &
TypeOf(V) == T1 &
VV == RelativeIndex(V) &
%tTT2 == TypeID(T2) &
BitSizeOf(UnderlyingType(T1)) > BitSizeOf(UnderlyingType(T2)) &
UnderlyingCount(T1) == UnderlyingCount(T2) &
IsInteger(UnderlyingType(T1)) &
IsInteger(UnderlyingType(T2)) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T2;

Examples:

 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 5>                |    count 5;
 50:4|    3: <7, 32>               |    @t0 = i32;
 53:6|    3: <2>                   |    @t1 = void;
 55:4|    3: <7, 16>               |    @t2 = i16;
 58:0|    3: <21, 0, 1, 0>         |    @t3 = void (i32);
 62:0|    3: <7, 8>                |    @t4 = i8;
 64:4|  0: <65534>                 |  }
 ...
100:0|  1: <65535, 12, 2>          |  function void @f0(i32 %p0) {
     |                             |                   // BlockID = 12
108:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
110:4|    3: <3, 1, 2, 0>          |    %v0 = trunc i32 %p0 to i16;
114:4|    3: <3, 1, 4, 0>          |    %v1 = trunc i16 %v0 to i8;
118:4|    3: <10>                  |    ret void;
120:2|  0: <65534>                 |  }

Floating Point Truncating Instruction

The floating point truncating instruction takes a value to truncate, and a type defining the truncated type. Both types must be floating point types, or floating point vectors with the same number of elements. The source must be double while the destination is float. If the source is a vector, the destination must also be vector with the same size as the source.

Syntax:

%vN = fptrunc T1 V to T2;                       <A>

Record:

AA: <3, VV, TT2, 7>

Semantics

The floating point truncating instruction takes a value V, and truncates to type T2. Both T1 and T2 must be floating point types, or floating point vectors with the same number of elements. T1 must be defined on double while T2 is defined on float. If the value can’t fit within the destination type T2, the results are undefined.

Constraints:

TypeOf(V) == T1 &
double == UnderlyingType(T1) &
float == UnderlyingType(T2) &
VV == RelativeIndex(V) &
%tTT2 == TypeID(T2) &
BitSizeOf(UnderlyingType(T1)) > BitSizeOf(UnderlyingType(T2)) &
UnderlyingCount(T1) == UnderlyingCount(T2) &
IsFloat(UnderlyingType(T1)) &
IsFloat(UnderlyingType(T2)) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T2;

Examples:

 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 4>                |    count 4;
 50:4|    3: <3>                   |    @t0 = float;
 52:2|    3: <4>                   |    @t1 = double;
 54:0|    3: <21, 0, 0, 1>         |    @t2 = float (double);
 58:0|    3: <2>                   |    @t3 = void;
 59:6|  0: <65534>                 |  }
...
 92:0|  1: <65535, 12, 2>          |  function float @f0(double %p0) {
     |                             |                   // BlockID = 12
100:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
102:4|    3: <3, 1, 0, 7>          |    %v0 = fptrunc double %p0 to float;
106:4|    3: <10, 1>               |    ret float %v0;
109:0|  0: <65534>                 |  }

Zero Extending Instruction

The zero extending instruction takes a value to extend, and a type to extend it to. Both types must be integer types, or integer vectors with the same number of elements. The bit size of the source type must be smaller than the bit size of the destination type. Equal sized types are not allowed.

Syntax:

%vN = zext T1 V to T2;                          <A>

Record:

AA: <3, VV, TT2, 1>

Semantics:

The zero extending instruction takes a value V, and expands it to type T2. Both T1 and T2 must be integer types, or integer vectors with the same number of elements. T2 must be wider than T1.

The instruction fills the high order bits of the value with zero bits until it reaches the size of the destination type. When zero extending from i1, the result will always be either 0 or 1.

Constraints:

AA == AbbrevIndex(A) &
TypeOf(V) == T1 &
VV == RelativeIndex(V) &
%tTT2 == TypeID(T2) &
BitSizeOf(UnderlyingType(T1)) < BitSizeOf(UnderlyingType(T2)) &
UnderlyingCount(T1) == UnderlyingCount(T2) &
IsInteger(UnderlyingType(T1)) &
IsInteger(UnderlyingType(T2)) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T2;

Examples:

 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 5>                |    count 5;
 50:4|    3: <7, 64>               |    @t0 = i64;
 53:6|    3: <7, 32>               |    @t1 = i32;
 57:0|    3: <21, 0, 0>            |    @t2 = i64 ();
 60:2|    3: <7, 8>                |    @t3 = i8;
 62:6|    3: <2>                   |    @t4 = void;
 64:4|  0: <65534>                 |  }
 ...
100:0|  1: <65535, 12, 2>          |  function i64 @f0() {  // BlockID = 12
108:0|    3: <1, 1>                |    blocks 1;
110:4|    1: <65535, 11, 2>        |    constants {  // BlockID = 11
120:0|      3: <1, 3>              |      i8:
122:4|      3: <4, 2>              |        %c0 = i8 1;
125:0|    0: <65534>               |      }
     |                             |  %b0:
128:0|    3: <3, 1, 1, 1>          |    %v0 = zext i8 %c0 to i32;
132:0|    3: <3, 1, 0, 1>          |    %v1 = zext i32 %v0 to i64;
136:0|    3: <10, 1>               |    ret i64 %v1;
138:4|  0: <65534>                 |  }

Sign Extending Instruction

The sign extending instruction takes a value to cast, and a type to extend it to. Both types must be integer types, or integral vectors with the same number of elements. The bit size of the source type must be smaller than the bit size of the destination type. Equal sized types are not allowed.

Syntax:

%vN = sext T1 V to T2;                          <A>

Record:

AA: <3, VV, TT2, 2>

Semantics:

The sign extending instruction takes a value V, and expands it to type T2. Both T1 and T2 must be integer types, or integer vectors with the same number of integers. T2 has to be wider than T1.

When sign extending, the instruction fills the high order bits of the value with the (current) high order bit of the value. When sign extending from i1, the extension always results in -1 or 0.

Constraints:

AA == AbbrevIndex(A) &
TypeOf(V) == T1 &
VV == RelativeIndex(V) &
%tTT2 == TypeID(T2) &
BitSizeOf(UnderlyingType(T1)) < BitSizeOf(UnderlyingType(T2)) &
UnderlyingCount(T1) == UnderlyingCount(T2) &
IsInteger(UnderlyingType(T1)) &
IsInteger(UnderlyingType(T2)) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T2;

Examples:

 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 5>                |    count 5;
 50:4|    3: <7, 64>               |    @t0 = i64;
 53:6|    3: <7, 32>               |    @t1 = i32;
 57:0|    3: <21, 0, 0>            |    @t2 = i64 ();
 60:2|    3: <7, 8>                |    @t3 = i8;
 62:6|    3: <2>                   |    @t4 = void;
 64:4|  0: <65534>                 |  }
 ...
100:0|  1: <65535, 12, 2>          |  function i64 @f0() {  // BlockID = 12
108:0|    3: <1, 1>                |    blocks 1;
110:4|    1: <65535, 11, 2>        |    constants {  // BlockID = 11
120:0|      3: <1, 3>              |      i8:
122:4|      3: <4, 3>              |        %c0 = i8 -1;
125:0|    0: <65534>               |      }
     |                             |  %b0:
128:0|    3: <3, 1, 1, 2>          |    %v0 = sext i8 %c0 to i32;
132:0|    3: <3, 1, 0, 2>          |    %v1 = sext i32 %v0 to i64;
136:0|    3: <10, 1>               |    ret i64 %v1;
138:4|  0: <65534>                 |  }

Floating Point Extending Instruction

The floating point extending instruction takes a value to extend, and a type to extend it to. Both types must either be floating point types, or vectors of floating point types with the same number of elements. The source value must be float while the destination is double. If the source is a vector, the destination must also be vector with the same size as the source.

Syntax:

%vN = fpext T1 V to T2;                           <A>

Record:

AA: <3, VV, TT2, 8>

Semantics:

The floating point extending instruction converts floating point values. V is the value to extend, and T2 is the type to extend it to. Both T1 and T2 must be floating point types, or floating point vector types with the same number of floating point values. T1 contains float while T2 contains double.

Constraints:

AA == AbbrevIndex(A) &
TypeOf(V) == T1 &
VV == RelativeIndex(V) &
%tTT2 == TypeID(T2) &
BitSizeOf(UnderlyingType(T1)) < BitSizeOf(UnderlyingType(T2)) &
UnderlyingCount(T1) == UnderlyingCount(T2) &
IsFloat(UnderlyingType(T1)) &
IsFloat(UnderlyingType(T2)) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T2;

Examples:

 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 4>                |    count 4;
 50:4|    3: <4>                   |    @t0 = double;
 52:2|    3: <3>                   |    @t1 = float;
 54:0|    3: <21, 0, 0, 1>         |    @t2 = double (float);
 58:0|    3: <2>                   |    @t3 = void;
 59:6|  0: <65534>                 |  }
 ...
 92:0|  1: <65535, 12, 2>          |  function double @f0(float %p0) {
     |                             |                   // BlockID = 12
100:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
102:4|    3: <3, 1, 0, 8>          |    %v0 = fpext float %p0 to double;
106:4|    3: <10, 1>               |    ret double %v0;
109:0|  0: <65534>                 |  }

Floating Point to Unsigned Integer Instruction

The floating point to unsigned integer instruction converts floating point values to unsigned integers.

Syntax:

%vN = fptoui T1 V to T2;                        <A>

Record:

AA: <3, VV, TT2, 3>

Semantics:

The floating point to unsigned integer instruction converts floating point value(s) in V to its unsigned integer equivalent of type T2. T1 must be a floating point type, or a floating point vector type. T2 must be an integer type, or an integer vector type. If either type is a vector type, they both must have the same number of elements.

Constraints:

AA == AbbrevIndex(A) &
TypeOf(V) == T1 &
VV == RelativeIndex(V) &
%tTT2 == TypeID(T2) &
UnderlyingCount(T1) == UnderlyingCount(T2) &
IsFloat(UnderlyingType(T1)) &
IsInteger(UnderlyingType(T2)) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T2;

Examples:

 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 6>                |    count 6;
 50:4|    3: <3>                   |    @t0 = float;
 52:2|    3: <4>                   |    @t1 = double;
 54:0|    3: <2>                   |    @t2 = void;
 55:6|    3: <21, 0, 2, 0, 1>      |    @t3 = void (float, double);
 60:4|    3: <7, 32>               |    @t4 = i32;
 63:6|    3: <7, 16>               |    @t5 = i16;
 66:2|  0: <65534>                 |  }
 ...
100:0|  1: <65535, 12, 2>          |  function
     |                             |      void @f0(float %p0, double %p1) {
     |                             |                    // BlockID = 12
108:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
110:4|    3: <3, 2, 4, 3>          |    %v0 = fptoui float %p0 to i32;
114:4|    3: <3, 2, 5, 3>          |    %v1 = fptoui double %p1 to i16;
118:4|    3: <10>                  |    ret void;
120:2|  0: <65534>                 |  }

Floating Point to Signed Integer Instruction

The floating point to signed integer instruction converts floating point values to signed integers.

Syntax:

%vN = fptosi T1 V to T2;                        <A>

Record:

AA: <3, VV, TT2, 4>

Semantics:

The floating point to signed integer instruction converts floating point value(s) in V to its signed integer equivalent of type T2. T1 must be a floating point type, or a floating point vector type. T2 must be an integer type, or an integer vector type. If either type is a vector type, they both must have the same number of elements.

Constraints:

AA == AbbrevIndex(A) &
TypeOf(V) == T1 &
VV == RelativeIndex(V) &
%tTT2 = TypeID(T2) &
UnderlyingCount(T1) = UnderlyingCount(T2) &
IsFloat(UnderlyingType(T1)) &
IsInteger(UnderlyingType(T2)) &
N = NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T2;

Examples:

 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 6>                |    count 6;
 50:4|    3: <3>                   |    @t0 = float;
 52:2|    3: <4>                   |    @t1 = double;
 54:0|    3: <2>                   |    @t2 = void;
 55:6|    3: <21, 0, 2, 0, 1>      |    @t3 = void (float, double);
 60:4|    3: <7, 8>                |    @t4 = i8;
 63:0|    3: <7, 16>               |    @t5 = i16;
 65:4|  0: <65534>                 |  }
 ...
100:0|  1: <65535, 12, 2>          |  function
     |                             |      void @f0(float %p0, double %p1) {
     |                             |                    // BlockID = 12
108:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
110:4|    3: <3, 2, 4, 4>          |    %v0 = fptosi float %p0 to i8;
114:4|    3: <3, 2, 5, 4>          |    %v1 = fptosi double %p1 to i16;
118:4|    3: <10>                  |    ret void;
120:2|  0: <65534>                 |  }

Unsigned Integer to Floating Point Instruction

The unsigned integer to floating point instruction converts unsigned integers to floating point values.

Syntax:

%vN = uitofp T1 V to T2;                        <A>

Record:

AA: <3, VV, TT2, 5>

Semantics:

The unsigned integer to floating point instruction converts unsigned integer(s) to its floating point equivalent of type T2. T1 must be an integer type, or a integer vector type. T2 must be a floating point type, or a floating point vector type. If either type is a vector type, they both must have the same number of elements.

Constraints:

AA == AbbrevIndex(A) &
TypeOf(V) == T1 &
VV == RelativeIndex(V) &
%tTT2 = TypeID(T2) &
UnderlyingCount(T1) == UnderlyingCount(T2) &
IsInteger(UnderlyingType(T1)) &
IsFloat(UnderlyingType(T2)) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) == T2;

Examples:

 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 7>                |    count 7;
 50:4|    3: <7, 32>               |    @t0 = i32;
 53:6|    3: <7, 64>               |    @t1 = i64;
 57:0|    3: <2>                   |    @t2 = void;
 58:6|    3: <3>                   |    @t3 = float;
 60:4|    3: <21, 0, 2, 0, 1>      |    @t4 = void (i32, i64);
 65:2|    3: <7, 1>                |    @t5 = i1;
 67:6|    3: <4>                   |    @t6 = double;
 69:4|  0: <65534>                 |  }
...
104:0|  1: <65535, 12, 2>          |  function void @f0(i32 %p0, i64 %p1) {
     |                             |                    // BlockID = 12
112:0|    3: <1, 1>                |    blocks 1;
114:4|    1: <65535, 11, 2>        |    constants {  // BlockID = 11
124:0|      3: <1, 5>              |      i1:
126:4|      3: <4, 3>              |        %c0 = i1 1;
129:0|    0: <65534>               |      }
     |                             |  %b0:
132:0|    3: <3, 1, 6, 5>          |    %v0 = uitofp i1 %c0 to double;
136:0|    3: <3, 4, 3, 5>          |    %v1 = uitofp i32 %p0 to float;
140:0|    3: <3, 4, 3, 5>          |    %v2 = uitofp i64 %p1 to float;
144:0|    3: <10>                  |    ret void;
145:6|  0: <65534>                 |  }

Signed Integer to Floating Point Instruction

The signed integer to floating point instruction converts signed integers to floating point values.

Syntax:

%vN = sitofp T1 V to T2;                        <A>

Record:

AA: <3, VV, TT2, 6>

Semantics:

The signed integer to floating point instruction converts signed integer(s) to its floating point equivalent of type T2. T1 must be an integer type, or a integer vector type. T2 must be a floating point type, or a floating point vector type. If either type is a vector type, they both must have the same number of elements.

Constraints:

AA == AbbrevIndex(A) &
TypeOf(V) == T1 &
VV == RelativeIndex(V) &
%tTT2 = TypeID(T2) &
UnderlyingCount(T1) == UnderlyingCount(T2) &
IsInteger(UnderlyingType(T1)) &
IsFloat(UnderlyingType(T2)) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T2;

Examples:

 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 7>                |    count 7;
 50:4|    3: <7, 32>               |    @t0 = i32;
 53:6|    3: <7, 64>               |    @t1 = i64;
 57:0|    3: <2>                   |    @t2 = void;
 58:6|    3: <3>                   |    @t3 = float;
 60:4|    3: <21, 0, 2, 0, 1>      |    @t4 = void (i32, i64);
 65:2|    3: <7, 8>                |    @t5 = i8;
 67:6|    3: <4>                   |    @t6 = double;
 69:4|  0: <65534>                 |  }
 ...
104:0|  1: <65535, 12, 2>          |  function void @f0(i32 %p0, i64 %p1) {
     |                             |                    // BlockID = 12
112:0|    3: <1, 1>                |    blocks 1;
114:4|    1: <65535, 11, 2>        |    constants {  // BlockID = 11
124:0|      3: <1, 5>              |      i8:
126:4|      3: <4, 3>              |        %c0 = i8 -1;
129:0|    0: <65534>               |      }
     |                             |  %b0:
132:0|    3: <3, 1, 6, 6>          |    %v0 = sitofp i8 %c0 to double;
136:0|    3: <3, 4, 3, 6>          |    %v1 = sitofp i32 %p0 to float;
140:0|    3: <3, 4, 3, 6>          |    %v2 = sitofp i64 %p1 to float;
144:0|    3: <10>                  |    ret void;
145:6|  0: <65534>                 |  }

Bitcast Instruction

The bitcast instruction converts the type of the value without changing the bit contents of the value. The bit size of the type of the value must be the same as the bit size of the cast type.

Syntax:

%vN = bitcast T1 V to T2;                       <A>

Record:

AA: <3, VV, TT2, 11>

Semantics:

The bitcast instruction converts the type of value V to type T2. T1 and T2 must be primitive types or vectors, and define the same number of bits.

Constraints:

AA == AbbrevIndex(A) &
TypeOf(V) == T1 &
VV = RelativeIndex(V) &
%tTT2 = TypeID(T2) &
BitSizeOf(T1) == BitSizeOf(T2) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T2;

Examples:

 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 6>                |    count 6;
 50:4|    3: <3>                   |    @t0 = float;
 52:2|    3: <7, 64>               |    @t1 = i64;
 55:4|    3: <2>                   |    @t2 = void;
 57:2|    3: <21, 0, 2, 0, 1>      |    @t3 = void (float, i64);
 62:0|    3: <7, 32>               |    @t4 = i32;
 65:2|    3: <4>                   |    @t5 = double;
 67:0|  0: <65534>                 |  }
 ...
100:0|  1: <65535, 12, 2>          |  function void @f0(float %p0, i64 %p1)
     |                             |      {  // BlockID = 12
108:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
110:4|    3: <3, 2, 4, 11>         |    %v0 = bitcast float %p0 to i32;
114:4|    3: <3, 2, 5, 11>         |    %v1 = bitcast i64 %p1 to double;
118:4|    3: <10>                  |    ret void;
120:2|  0: <65534>                 |  }

Comparison Instructions

The comparison instructions compare values and generates a boolean (i1) result for each pair of compared values. There are different comparison operations for integer and floating point values.

Integer Comparison Instructions

The integer comparison instruction compares integer values and returns a boolean (i1) result for each pair of compared values.

Syntax:

%vN = icmp C T V1, V2;                          <A>

Record:

AA: <9, VV1, VV2, CC>

Semantics:

The integer comparison instruction compares integer values and returns a boolean (i1) result for each pair of compared values in V1 and V2. V1 and V2 must be of type T. T must be an integer type, or an integer vector type. Condition code C is the condition applied to all elements in V1 and V2. Each comparison always yields an i1. If T is a primitive type, the resulting type is i1. If T is a vector, then the resulting type is a vector of i1 with the same size as T.

Legal test conditions are:

CCCOperator
eq32equal
ne33not equal
ugt34unsigned greater than
uge35unsigned greater than or equal
ult36unsigned less than
ule37unsigned less than or equal
sgt38signed greater than
sge39signed greater than or equal
slt40signed less than
sle41signed less than or equal

Constraints:

AA == AbbrevIndex(A) &
IsInteger(UnderlyingType(T) &
T == TypeOf(V1) == TypeOf(V2) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
if IsVector(T) then
  TypeOf(%vN) = <UnderlyingCount(T), i1>
else
  TypeOf(%vN) = i1
endif

Examples:

 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 4>                |    count 4;
 50:4|    3: <7, 32>               |    @t0 = i32;
 53:6|    3: <7, 1>                |    @t1 = i1;
 56:2|    3: <2>                   |    @t2 = void;
 58:0|    3: <21, 0, 2>            |    @t3 = void ();
 61:2|  0: <65534>                 |  }
 ...
108:0|  1: <65535, 12, 2>          |  function void @f0() {
     |                             |                   // BlockID = 12
116:0|    3: <1, 1>                |    blocks 1;
118:4|    1: <65535, 11, 2>        |    constants {  // BlockID = 11
128:0|      3: <1, 0>              |      i32:
130:4|      3: <4, 0>              |        %c0 = i32 0;
133:0|      3: <4, 2>              |        %c1 = i32 1;
135:4|    0: <65534>               |      }
     |                             |  %b0:
136:0|    3: <28, 2, 1, 32>        |    %v0 = icmp eq i32 %c0, %c1;
140:6|    3: <28, 3, 2, 33>        |    %v1 = icmp ne i32 %c0, %c1;
145:4|    3: <28, 4, 3, 34>        |    %v2 = icmp ugt i32 %c0, %c1;
150:2|    3: <28, 5, 4, 36>        |    %v3 = icmp ult i32 %c0, %c1;
155:0|    3: <28, 6, 5, 37>        |    %v4 = icmp ule i32 %c0, %c1;
159:6|    3: <28, 7, 6, 38>        |    %v5 = icmp sgt i32 %c0, %c1;
164:4|    3: <28, 8, 7, 38>        |    %v6 = icmp sgt i32 %c0, %c1;
169:2|    3: <28, 9, 8, 39>        |    %v7 = icmp sge i32 %c0, %c1;
174:0|    3: <28, 10, 9, 40>       |    %v8 = icmp slt i32 %c0, %c1;
178:6|    3: <28, 11, 10, 41>      |    %v9 = icmp sle i32 %c0, %c1;
183:4|    3: <10>                  |    ret void;
185:2|  0: <65534>                 |  }

Floating Point Comparison Instructions

The floating point comparison instruction compares floating point values and returns a boolean (i1) result for each pair of compared values.

Syntax:

%vN = fcmp C T V1, V2;                          <A>

Record:

AA: <9, VV1, VV2, CC>

Semantics:

The floating point comparison instruction compares floating point values and returns a boolean (i1) result for each pair of compared values in V1 and V2. V1 and V2 must be of type T. T must be a floating point type, or a floating point vector type. Condition code C is the condition applied to all elements in V1 and V2. Each comparison always yields an i1. If T is a primitive type, the resulting type is i1. If T is a vector, then the resulting type is a vector of i1 with the same size as T.

Legal test conditions are:

CCCOperator
false0Always false
oeq1Ordered and equal
ogt2Ordered and greater than
oge3Ordered and greater than or equal
olt4Ordered and less than
ole5Ordered and less than or equal
one6Ordered and not equal
ord7Ordered (no NaNs)
uno8Unordered (either NaNs)
ueq9Unordered or equal
ugt10Unordered or greater than
uge11Unordered or greater than or equal
ult12Unordered or less than
ule13Unordered or less than or equal
une14Unordered or not equal
true15Always true

Constraints:

AA == AbbrevIndex(A) &
IsFloat(UnderlyingType(T) &
T == TypeOf(V1) == TypeOf(V2) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
if IsVector(T) then
  TypeOf(%vN) = <UnderlyingCount(T), i1>
else
  TypeOf(%vN) = i1
endif

Examples:

 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 4>                |    count 4;
 50:4|    3: <3>                   |    @t0 = float;
 52:2|    3: <7, 1>                |    @t1 = i1;
 54:6|    3: <2>                   |    @t2 = void;
 56:4|    3: <21, 0, 2>            |    @t3 = void ();
 59:6|  0: <65534>                 |  }
 ...
108:0|  1: <65535, 12, 2>          |  function void @f0() {
     |                             |                   // BlockID = 12
116:0|    3: <1, 1>                |    blocks 1;
118:4|    1: <65535, 11, 2>        |    constants {  // BlockID = 11
128:0|      3: <1, 0>              |      float:
130:4|      3: <6, 0>              |        %c0 = float 0;
133:0|      3: <6, 1065353216>     |        %c1 = float 1;
139:2|    0: <65534>               |      }
     |                             |  %b0:
140:0|    3: <28, 2, 1, 0>         |    %v0 = fcmp false float %c0, %c1;
144:0|    3: <28, 3, 2, 1>         |    %v1 = fcmp oeq float %c0, %c1;
148:0|    3: <28, 4, 3, 2>         |    %v2 = fcmp ogt float %c0, %c1;
152:0|    3: <28, 5, 4, 3>         |    %v3 = fcmp oge float %c0, %c1;
156:0|    3: <28, 6, 5, 4>         |    %v4 = fcmp olt float %c0, %c1;
160:0|    3: <28, 7, 6, 5>         |    %v5 = fcmp ole float %c0, %c1;
164:0|    3: <28, 8, 7, 6>         |    %v6 = fcmp one float %c0, %c1;
168:0|    3: <28, 9, 8, 7>         |    %v7 = fcmp ord float %c0, %c1;
172:0|    3: <28, 10, 9, 9>        |    %v8 = fcmp ueq float %c0, %c1;
176:0|    3: <28, 11, 10, 10>      |    %v9 = fcmp ugt float %c0, %c1;
180:0|    3: <28, 12, 11, 11>      |    %v10 = fcmp uge float %c0, %c1;
184:0|    3: <28, 13, 12, 12>      |    %v11 = fcmp ult float %c0, %c1;
188:0|    3: <28, 14, 13, 13>      |    %v12 = fcmp ule float %c0, %c1;
192:0|    3: <28, 15, 14, 14>      |    %v13 = fcmp une float %c0, %c1;
196:0|    3: <28, 16, 15, 8>       |    %v14 = fcmp uno float %c0, %c1;
200:0|    3: <28, 17, 16, 15>      |    %v15 = fcmp true float %c0, %c1;
204:0|    3: <10>                  |    ret void;
205:6|  0: <65534>                 |  }
208:0|0: <65534>                   |}

Vector Instructions

PNaClAsm supports several instructions that process vectors. This includes the integer and floating point binary instructions as well as compare instructions. These instructions work with vectors and generate resulting (new) vectors. This section introduces the instructions to construct vectors and extract results.

Insert Element Instruction

The insert element instruction inserts a scalar value into a vector at a specified index. The insert element instruction takes an existing vector and puts a scalar value in one of the elements of the vector.

The insert element instruction can be used to construct a vector, one element at a time. At first glance, it may appear that one can’t construct a vector, since the insert element instruction needs a vector to insert elements into.

The key to understanding vector construction is understand that one can create an undefined vector literal. Using that constant as a starting point, one can built up the wanted vector by a sequence of insert element instructions.

Syntax:

%vN = insertelement TV V, TE E, i32 I;          <A>

Record:

AA: <7, VV, EE, II>

Semantics:

The insert element instruction inserts scalar value E into index I of vector V. %vN holds the updated vector. Type TV is the type of vector. It is also the type of updated vector %vN. Type TE is the type of scalar value E and must be the element type of vector V. I must be an i32 literal.

If I exceeds the length of V, the result is undefined.

Constraints:

AA == AbbrevIndex(A) &
IsVector(TV) &
TypeOf(V) == TV &
UnderlyingType(TV) == TE &
TypeOf(I) == i32 &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = TV;

Examples:

 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 5>                |    count 5;
 50:4|    3: <7, 1>                |    @t0 = i1;
 53:0|    3: <12, 4, 0>            |    @t1 = <4 x i1>;
 56:2|    3: <7, 32>               |    @t2 = i32;
 59:4|    3: <2>                   |    @t3 = void;
 61:2|    3: <21, 0, 3>            |    @t4 = void ();
 64:4|  0: <65534>                 |  }
 ...
116:0|  1: <65535, 12, 2>          |  function void @f0() {
     |                             |                   // BlockID = 12
124:0|    3: <1, 1>                |    blocks 1;
126:4|    1: <65535, 11, 2>        |    constants {  // BlockID = 11
136:0|      3: <1, 0>              |      i1:
138:4|      3: <4, 0>              |        %c0 = i1 0;
141:0|      3: <4, 3>              |        %c1 = i1 1;
143:4|      3: <1, 1>              |      <4 x i1>:
146:0|      3: <3>                 |        %c2 = <4 x i1> undef;
147:6|      3: <1, 2>              |      i32:
150:2|      3: <4, 0>              |        %c3 = i32 0;
152:6|      3: <4, 2>              |        %c4 = i32 1;
155:2|      3: <4, 4>              |        %c5 = i32 2;
157:6|      3: <4, 6>              |        %c6 = i32 3;
160:2|    0: <65534>               |      }
     |                             |  %b0:
164:0|    3: <7, 5, 7, 4>          |    %v0  =  insertelement <4 x i1> %c2,
     |                             |        i1 %c0, i32 %c3;
168:0|    3: <7, 1, 7, 4>          |    %v1  =  insertelement <4 x i1> %v0,
     |                             |        i1 %c1, i32 %c4;
172:0|    3: <7, 1, 9, 4>          |    %v2  =  insertelement <4 x i1> %v1,
     |                             |        i1 %c0, i32 %c5;
176:0|    3: <7, 1, 9, 4>          |    %v3  =  insertelement <4 x i1> %v2,
     |                             |        i1 %c1, i32 %c6;
180:0|    3: <10>                  |    ret void;
181:6|  0: <65534>                 |  }

Extract Element Instruction

The extract element instruction extracts a single scalar value from a vector at a specified index.

Syntax:

%vN = extractelement TV V, i32 I;                <A>

Record:

AA: <6, VV, II>

Semantics:

The extract element instruction extracts the scalar value at index I from vector V. The extracted value is assigned to %vN. Type TV is the type of vector V. I must be an i32 literal. The type of vN must be the element type of vector V.

If I exceeds the length of V, the result is undefined.

Constraints:

AA == AbbrevIndex(A) &
IsVector(TV) &
TypeOf(V) == TV &
TypeOf(I) == i32 &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = UnderlyingType(TV);

Examples:

 96:0|  1: <65535, 12, 2>          |  function void @f0(<4 x i32> %p0) {
     |                             |                   // BlockID = 12
104:0|    3: <1, 1>                |    blocks 1;
106:4|    1: <65535, 11, 2>        |    constants {  // BlockID = 11
116:0|      3: <1, 0>              |      i32:
118:4|      3: <4, 0>              |        %c0 = i32 0;
121:0|    0: <65534>               |      }
     |                             |  %b0:
124:0|    3: <6, 2, 1>             |    %v0  =
     |                             |        extractelement <4 x i32> %p0,
     |                             |        i32 %c0;
127:2|    3: <10>                  |    ret void;
129:0|  0: <65534>                 |  }

Other Instructions

This section defines miscellaneous instructions which defy better classification.

Forward Type Declaration

The forward type declaration exists to deal with the fact that all instruction values must have a type associated with them before they are used. For some simple functions one can easily topologically sort instructions so that instruction values are defined before they are used. However, if the implementation contains loops, the loop induced values can’t be defined before they are used.

The solution is to forward declare the type of an instruction value. One could forward declare the types of all instructions at the beginning of the function block. However, this would make the corresponding file size considerably larger. Rather, one should only generate these forward type declarations sparingly and only when needed.

Syntax:

declare T %vN;                                  <A>

Record:

AA: <43, N, TT>

Semantics:

The forward declare type declaration defines the type to be associated with a (not yet defined) instruction value %vN. T is the type of the value generated by the Nth value generating instruction in the function block.

Note: It is an error to define the type of %vN with a different type than will be generated by the Nth value generating instruction in the function block.

Also note that this construct is a declaration and not considered an instruction, even though it appears in the list of instruction records. Hence, they may appear before and between phi instructions in a basic block.

Constraints:

AA = AbbrevIndex(A) &
TT = TypeID(T)

Updates:

TypeOf(%vN) = T;

Examples:

 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 4>                |    count 4;
 50:4|    3: <7, 32>               |    @t0 = i32;
 53:6|    3: <2>                   |    @t1 = void;
 55:4|    3: <7, 1>                |    @t2 = i1;
 58:0|    3: <21, 0, 1, 0>         |    @t3 = void (i32);
 62:0|  0: <65534>                 |  }
 ...
108:0|  1: <65535, 12, 2>          |  function void @f0(i32 %p0) {
     |                             |                   // BlockID = 12
116:0|    3: <1, 7>                |    blocks 7;
118:4|    1: <65535, 11, 2>        |    constants {  // BlockID = 11
128:0|      3: <1, 2>              |      i1:
130:4|      3: <4, 3>              |        %c0 = i1 1;
133:0|    0: <65534>               |      }
     |                             |  %b0:
136:0|    3: <11, 4>               |    br label %b4;
     |                             |  %b1:
138:4|    3: <43, 6, 0>            |    declare i32 %v3;
142:4|    3: <2, 2, 4294967293, 0> |    %v0 = add i32 %p0, %v3;
151:0|    3: <11, 6>               |    br label %b6;
     |                             |  %b2:
153:4|    3: <43, 7, 0>            |    declare i32 %v4;
157:4|    3: <2, 3, 4294967293, 0> |    %v1 = add i32 %p0, %v4;
166:0|    3: <11, 6>               |    br label %b6;
     |                             |  %b3:
168:4|    3: <2, 4, 4294967295, 0> |    %v2 = add i32 %p0, %v3;
177:0|    3: <11, 6>               |    br label %b6;
     |                             |  %b4:
179:4|    3: <2, 5, 5, 0>          |    %v3 = add i32 %p0, %p0;
183:4|    3: <11, 1, 5, 5>         |    br i1 %c0, label %b1, label %b5;
     |                             |  %b5:
187:4|    3: <2, 1, 6, 0>          |    %v4 = add i32 %v3, %p0;
191:4|    3: <11, 2, 3, 6>         |    br i1 %c0, label %b2, label %b3;
     |                             |  %b6:
195:4|    3: <10>                  |    ret void;
197:2|  0: <65534>                 |  }

Phi Instruction

The phi instruction is used to implement phi nodes in the SSA graph representing the function. Phi instructions can only appear at the beginning of a basic block. There must be no non-phi instructions (other than forward type declarations) between the start of the basic block and the phi instruction.

To clarify the origin of each incoming value, the incoming value is associated with the incoming edge from the corresponding predecessor block that the incoming value comes from.

Syntax:

%vN = phi T [V1, %bB1], ... , [VM, %bBM];        <A>

Record:

AA: <16, TT, VV1, B1, ..., VVM, BM>

Semantics:

The phi instruction is used to implement phi nodes in the SSA graph representing the function. %vN is the resulting value of the corresponding phi node. T is the type of the phi node. Values V1 through VM are the reaching definitions for the phi node while %bB1 through %bBM are the corresponding predecessor blocks. Each VI reaches via the incoming predecessor edge from block %bBI (for 1 <= I <= M). Type T must be the type associated with each VI.

Constraints:

AA == AbbrevIndex(A) &
M > 1 &
TT == TypeID(T) &
T = TypeOf(VI) for all I, 1 <= I <= M &
BI < ExpectedBasicBlocks for all I, 1 <= I <= M &
VVI = SignRotate(RelativeIndex(VI)) for all I, 1 <= I <= M &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T;

Examples:

 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 4>                |    count 4;
 50:4|    3: <7, 32>               |    @t0 = i32;
 53:6|    3: <2>                   |    @t1 = void;
 55:4|    3: <21, 0, 1>            |    @t2 = void ();
 58:6|    3: <7, 1>                |    @t3 = i1;
 61:2|  0: <65534>                 |  }
 ...
112:0|  1: <65535, 12, 2>          |  function void @f0() {
     |                             |                   // BlockID = 12
120:0|    3: <1, 4>                |    blocks 4;
122:4|    1: <65535, 11, 2>        |    constants {  // BlockID = 11
132:0|      3: <1, 0>              |      i32:
134:4|      3: <4, 2>              |        %c0 = i32 1;
137:0|      3: <1, 3>              |      i1:
139:4|      3: <4, 0>              |        %c1 = i1 0;
142:0|    0: <65534>               |      }
     |                             |  %b0:
144:0|    3: <11, 1, 2, 1>         |    br i1 %c1, label %b1, label %b2;
     |                             |  %b1:
148:0|    3: <2, 2, 2, 0>          |    %v0 = add i32 %c0, %c0;
152:0|    3: <2, 3, 3, 1>          |    %v1 = sub i32 %c0, %c0;
156:0|    3: <11, 3>               |    br label %b3;
     |                             |  %b2:
158:4|    3: <2, 4, 4, 2>          |    %v2 = mul i32 %c0, %c0;
162:4|    3: <2, 5, 5, 3>          |    %v3 = udiv i32 %c0, %c0;
166:4|    3: <11, 3>               |    br label %b3;
     |                             |  %b3:
169:0|    3: <16, 0, 8, 1, 4, 2>   |    %v4 = phi i32 [%v0, %b1],
     |                             |        [%v2, %b2];
174:4|    3: <16, 0, 8, 1, 4, 2>   |    %v5 = phi i32 [%v1, %b1],
     |                             |        [%v3, %b2];
180:0|    3: <10>                  |    ret void;
181:6|  0: <65534>                 |  }

Select Instruction

The select instruction is used to choose between pairs of values, based on a condition, without PNaClAsm-level branching.

Syntax:

%vN = select CT C, T V1, T V2;                <A>

Record:

AA: <29, VV1, VV2, CC>

Semantics:

The select instruction chooses pairs of values V1 and V2, based on condition value C. The type CT of value C must either be an i1, or a vector of type i1. The type of values V1 and V2 must be of type T. Type T must either be a primitive type, or a vector of a primitive type.

Both CT and T must be primitive types, or both must be vector types of the same size. When the contents of C is 1, the corresponding value from V1 will be chosen. Otherwise the corresponding value from V2 will be chosen.

Constraints:

AA == AbbrevIndex(A) &
CC == RelativeIndex(C) &
VV1 == RelativeIndex(V1) &
VV2 == RelativeIndex(V2) &
T == TypeOf(V1) == TypeOf(V2) &
UnderlyingType(CT) == i1 &
IsInteger(UnderlyingType(T)) or IsFloat(UnderlyingType(T)) &
UnderlyingCount(C) == UnderlyingCount(T) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = T;

Examples:

 96:0|  1: <65535, 12, 2>          |  function i32 @f0(i32 %p0, i32 %p1) {
     |                             |                   // BlockID = 12
104:0|    3: <1, 1>                |    blocks 1;
106:4|    1: <65535, 11, 2>        |    constants {  // BlockID = 11
116:0|      3: <1, 2>              |      i1:
118:4|      3: <4, 3>              |        %c0 = i1 1;
121:0|    0: <65534>               |      }
     |                             |  %b0:
124:0|    3: <29, 3, 2, 1>         |    %v0 = select i1 %c0, i32 %p0,
     |                             |        i32 %p1;
128:0|    3: <10, 1>               |    ret i32 %v0;
130:4|  0: <65534>                 |  }

Call Instructions

The call instruction does a function call. The call instruction is used to cause control flow to transfer to a specified routine, with its incoming arguments bound to the specified values. When a return instruction in the called function is reached, control flow continues with the instruction after the function call. If the call is to a function, the returned value is the value generated by the call instruction. Otherwise no result is defined by the call.

If the tail flag is associated with the call instruction, then the PNaCl translator is free to perform tail call optimization. That is, the tail flag is a hint that may be ignored by the PNaCl translator.

There are two kinds of calls: direct and indirect. A direct call calls a defined function address (i.e. a reference to a bitcode ID of the form %fF). All other calls are indirect.

Direct Procedure Call

The direct procedure call calls a defined function address whose type signature returns type void.

Syntax:

TAIL call void @fF (T1 A1, ... , TN AN);        <A>

Record:

AA: <34, CC, F, AA1, ... , AAN>

Semantics:

The direct procedure call calls a define function address %fF whose type signature return type is void. The arguments A1 through AN are passed in the order specified. The type of argument AI must be type TI (for all I, 1 <=I <= N). Flag TAIL is optional. If it is included, it must be the literal tail.

The types of the arguments must match the corresponding types of the function signature associated with %fF. The return type of %f must be void.

TAIL is encoded into calling convention value CC as follows:

TAILCC
“”0
“tail”1

Constraints:

AA == AbbrevIndex(A) &
N >= 0 &
TypeOfFcn(%fF) == void (T1, ... , TN) &
TypeOf(AI) == TI for all I, 1 <= I <= N

Updates:

++NumValuedInsts;

Examples:

 72:0|  3: <8, 3, 0, 1, 0>         |  declare external
     |                             |      void @f0(i32, i64, i32);
 ...
116:0|  1: <65535, 12, 2>          |  function void @f1(i32 %p0) {
     |                             |                   // BlockID = 12
124:0|    3: <1, 1>                |    blocks 1;
126:4|    1: <65535, 11, 2>        |    constants {  // BlockID = 11
136:0|      3: <1, 2>              |      i64:
138:4|      3: <4, 2>              |        %c0 = i64 1;
141:0|    0: <65534>               |      }
     |                             |  %b0:
144:0|    3: <34, 0, 4, 2, 1, 2>   |    call void
     |                             |        @f0(i32 %p0, i64 %c0, i32 %p0);
150:2|    3: <10>                  |    ret void;
152:0|  0: <65534>                 |  }

Direct Function Call

The direct function call calls a defined function address whose type signature returns a value.

Syntax:

%vN = TAIL call RT %fF (T1 A1, ... , TM AM);  <A>

Record:

AA: <34, CC, F, AA1, ... , AAM>

Semantics:

The direct function call calls a defined function address %fF whose type signature returned is not type void. The arguments A1 through AM are passed in the order specified. The type of argument AI must be type TI (for all I, 1 <= I <= N). Flag TAIL is optional. If it is included, it must be the literal tail.

The types of the arguments must match the corresponding types of the function signature associated with %fF. The return type must match RT.

Each parameter type TI, and return type RT, must either be a primitive type, or a vector type. If the parameter type is an integer type, it must either be i32 or i64.

TAIL is encoded into calling convention value CC as follows:

TAILCC
“”0
“tail”1

Constraints:

AA == AbbrevIndex(A) &
N >= 0 &
TypeOfFcn(%fF) == RT (T1, ... , TN) &
TypeOf(AI) == TI for all I, 1 <= I <= M &
IsFcnArgType(TI) for all I, 1 <= I <= M &
IsFcnArgType(RT) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = RT;

Examples:

 72:0|  3: <8, 2, 0, 1, 0>         |  declare external
     |                             |      i32 @f0(i32, i64, i32);
 ...
116:0|  1: <65535, 12, 2>          |  function i32 @f1(i32 %p0) {
     |                             |                   // BlockID = 12
124:0|    3: <1, 1>                |    blocks 1;
126:4|    1: <65535, 11, 2>        |    constants {  // BlockID = 11
136:0|      3: <1, 1>              |      i64:
138:4|      3: <4, 2>              |        %c0 = i64 1;
141:0|    0: <65534>               |      }
     |                             |  %b0:
144:0|    3: <34, 0, 4, 2, 1, 2>   |    %v0 = call i32
     |                             |        @f0(i32 %p0, i64 %c0, i32 %p0);
150:2|    3: <34, 1, 4, 1>         |    %v1 = tail call i32 @f1(i32 %v0);
155:0|    3: <10, 2>               |    ret i32 %v0;
157:4|  0: <65534>                 |  }

Indirect Procedure Call

The indirect procedure call calls a function using an indirect function address, and whose type signature is assumed to return type void. It is different from the direct procedure call because we can’t use the type signature of the corresponding direct function address to type check the construct.

Syntax:

TAIL call void V (T1 A1, ... , TN AN);        <A>

Record:

AA: <44, CC, TV, VV, AA1, ... , AAN>

Semantics:

The indirect call procedure calls a function using value V that is an indirect function address, and whose type signature is assumed to return type void. The arguments A1 through AN are passed in the order specified. The type of argument AI must be type TI (for all I, 1 <= I <= N). Flag TAIL is optional. If it is included, it must be the literal tail.

Each parameter type TI (1 <= I <= N) must either be a primitive type, or a vector type. If the parameter type is an integer type, it must either be i32 or i64.

TAIL is encoded into calling convention value CC as follows:

TAILCC
“”0
“tail”1

The type signature of the called procedure is assumed to be:

void (T1, ... , TN)

It isn’t necessary to define this type in the types block, since the type is inferred rather than used.

Constraints:

AA == AbbrevIndex(A) &
N >= 0 &
TV = TypeID(void) &
AbsoluteIndex(V) >= NumFuncAddresses &
TypeOf(AI) == TI for all I, 1 <= I <= N &
IsFcnArgType(TI) for all I, 1 <= I <= N

Updates:

++NumValuedInsts;

Examples:

 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 3>                |    count 3;
 50:4|    3: <2>                   |    @t0 = void;
 52:2|    3: <7, 32>               |    @t1 = i32;
 55:4|    3: <21, 0, 0, 1>         |    @t2 = void (i32);
 59:4|  0: <65534>                 |  }
 ...
 92:0|  1: <65535, 12, 2>          |  function void @f0(i32 %p0) {
     |                             |                   // BlockID = 12
100:0|    3: <1, 1>                |    blocks 1;
102:4|    1: <65535, 11, 2>        |    constants {  // BlockID = 11
112:0|      3: <1, 1>              |      i32:
114:4|      3: <4, 2>              |        %c0 = i32 1;
117:0|    0: <65534>               |      }
     |                             |  %b0:
120:0|    3: <44, 0, 2, 0, 1>      |    call void %p0(i32 %c0);
125:4|    3: <10>                  |    ret void;
127:2|  0: <65534>                 |  }

Indirect Function Call

The indirect function call calls a function using a value that is an indirect function address. It is different from the direct function call because we can’t use the type signature of the corresponding literal function address to type check the construct.

Syntax:

%vN = TAIL call RT V (T1 A1, ... , TM AM);  <A>

Record:

AA: <34, CC, RRT, VV, AA1, ... , AAM>

Semantics:

The indirect function call calls a function using a value V that is an indirect function address, and is assumed to return type RT. The arguments A1 through AM are passed in the order specified. The type of argument AI must be type TI (for all I, 1 <= I <= N). Flag TAIL is optional. If it is included, it must be the literal tail.

Each parameter type TI (1 <= I <= M), and return type RT, must either be a primitive type, or a vector type. If the parameter type is an integer type, it must either be i32 or i64.

TAIL is encoded into calling convention value CC as follows:

TAILCC
‘’0
‘tail’1

The type signature of the called function is assumed to be:

RT (T1, ... , TN)

It isn’t necessary to define this type in the types block, since the type is inferred rather than used.

Constraints:

AA == AbbrevIndex(A) &
RRT = TypeID(RT) &
VV = RelativeIndex(V) &
M >= 0 &
AbsoluteIndex(V) >= NumFcnAddresses &
TypeOf(AI) == TI for all I, 1 <= I <= M &
IsFcnArgType(TI) for all I, 1 <= I <= M &
IsFcnArgType(RT) &
N == NumValuedInsts

Updates:

++NumValuedInsts;
TypeOf(%vN) = RT;

Examples:

 40:0|  1: <65535, 17, 2>          |  types {  // BlockID = 17
 48:0|    3: <1, 6>                |    count 6;
 50:4|    3: <7, 32>               |    @t0 = i32;
 53:6|    3: <3>                   |    @t1 = float;
 55:4|    3: <4>                   |    @t2 = double;
 57:2|    3: <21, 0, 0, 0, 1, 2>   |    @t3 = i32 (i32, float, double);
 62:6|    3: <21, 0, 0, 1, 2>      |    @t4 = i32 (float, double);
 67:4|    3: <2>                   |    @t5 = void;
 69:2|  0: <65534>                 |  }
 ...
104:0|  1: <65535, 12, 2>          |  function
     |                             |      i32
     |                             |      @f0(i32 %p0, float %p1,
     |                             |          double %p2) {
     |                             |                   // BlockID = 12
112:0|    3: <1, 1>                |    blocks 1;
     |                             |  %b0:
114:4|    3: <44, 0, 3, 0, 2, 1>   |    %v0 = call i32
     |                             |        %p0(float %p1, double %p2);
120:6|    3: <10, 1>               |    ret i32 %v0;
123:2|  0: <65534>                 |  }

Memory Blocks and Alignment

In general, variable and heap allocated data are represented as byte addressable memory blocks. Alignment is always a power of 2, and defines an expectation on the memory address. That is, an alignment is met if the memory address is (evenly) divisible by the alignment. Note that alignment of 0 is never allowed.

Alignment plays a role at two points:
  • When you create a local/global variable
  • When you load/store data using a pointer.

PNaClAsm allows most types to be placed at any address, and therefore can have alignment of 1. However, many architectures can load more efficiently if the data has an alignment that is larger than 1. As such, choosing a larger alignment can make load/stores more efficient.

On loads and stores, the alignment in the instruction is used to communicate what assumptions the PNaCl translator can make when choosing the appropriate machine instructions. If the alignment is 1, it can’t assume anything about the memory address used by the instruction. When the alignment is greater than one, it can use that information to potentially chose a more efficient sequence of instructions to do the load/store.

When laying out data within a variable, one also considers alignment. The reason for this is that if you want an address to be aligned, within the bytes defining the variable, you must choose an alignment for the variable that guarantees that alignment.

In PNaClAsm, the valid load/store alignments are:

TypeAlignment
i11
i81
i161
i321
i641
Float1, 4
Double1, 8
<4 x i1>not applicable
<8 x i1>not applicable
<16 x i1>not applicable
<16 x i8>1
<8 x i16>2
<4 x i32>4
<4 x float>4

Note that only vectors do not have an alignment value of 1. Hence, they can’t be placed at an arbitrary memory address. Also, since vectors on i1 can’t be loaded/stored, the alignment is not applicable for these types.

Intrinsic Functions

Intrinsic functions are special in PNaClAsm. They are implemented as specially named (external) function calls. The purpose of these intrinsic functions is to extend the PNaClAsm instruction set with additional functionality that is architecture specific. Hence, they either can’t be implemented within PNaClAsm, or a non-architecture specific implementation may be too slow on some architectures. In such cases, the PNaCl translator must fill in the corresponding implementation, since only it knows the architecture it is compiling down to.

Examples of intrinsic function calls are for concurrent operations, atomic operations, bulk memory moves, thread pointer operations, and long jumps.

It should be noted that calls to intrinsic functions do not have the same calling type constraints as ordinary functions. That is, an intrinsic can use any integer type for arguments/results, unlike ordinary functions (which restrict integer types to i32 and i64).

See the PNaCl bitcode reference manual for the full set of intrinsic functions allowed. Note that in PNaClAsm, all pointer types to an (LLVM) intrinsic function is converted to type i32.

Support Functions

Defines functions used to convert syntactic representation to values in the corresponding record.

SignRotate

The SignRotate function encodes a signed integer in an easily compressible form. This is done by rotating the sign bit to the rightmost bit, rather than the leftmost bit. By doing this rotation, both small positive and negative integers are small (unsigned) integers. Therefore, all small integers can be encoded as a small (unsigned) integers.

The definition of SignRotate(N) is:

ArgumentValueCondition
Nabs(N)<<1N >= 0
Nabs(N)<<1 + 1N < 0

AbsoluteIndex

Bitcode IDs of the forms @fN, @gN, %pN, %cN, and %vN, are combined into a single index space. This can be done because of the ordering imposed by PNaClAsm. All function address bitcode IDs must be defined before any of the other forms of bitcode IDs. All global address bitcode IDs must be defined before any local bitcode IDs. Within a function block, the parameter bitcode IDs must be defined before constant IDs, and constant IDs must be defined before instruction value IDs.

Hence, within a function block, it is safe to refer to all of these bitcode IDs using a single absolute index. The absolute index for each kind of bitcode ID is computed as follows:

Bitcode IDAbsoluteIndex
@tNN
@fNN
@gNN + NumFcnAddresses
@pNN + NumFcnAddresses + NumGlobalAddresses
@cNN + NumFcnAddresses + NumGlobalAddresses + NumParams
@vNN + NumFcnAddresses + NumGlobalAddresses + NumParams + NumFcnConsts

RelativeIndex

Relative indices are used to refer to values within instructions of a function. The relative index of an ID is always defined in terms of the index associated with the next value generating instruction. It is defined as follows:

RelativeIndex(J) = AbsoluteIndex(%vN) - AbsoluteIndex(J)

where:

N = NumValuedInsts

AbbrevIndex

This function converts user-defined abbreviation indices to the corresponding internal abbreviation index saved in the bitcode file. It adds 4 to its argument, since there are 4 predefined internal abbreviation indices (0, 1, 2, and 3).

NAbbrevIndex(N)
undefined3
%aAA + 4
@aAA + 4

Log2

This is the 32-bit log2 value of its argument.

BitSizeOf

Returns the number of bits needed to represent its argument (a type).

TBitSizeOf
i11
i88
i1616
i3232
i6464
float32
double64
<N X T>N * BitSizeOf(T)

UnderlyingType

Returns the primitive type of the type construct. For primitive types, the UnderlyingType is itself. For vector types, the base type of the vector is the underlying type.

UnderlyingCount

Returns the size of the vector if given a vector, and 0 for primitive types. Note that this function is used to check if two vectors are of the same size. It is also used to test if two types are either primitive (i.e. UnderlyingCount returns 0 for both types) or are vectors of the same size (i.e. UnderlyingCount returns the same non-zero value).

IsInteger

Returns true if the argument is in {i1, i8, i16, i32, i64}.

IsFloat

Returns true if the argument is in {float, double}.

IsVector

Returns true if the argument is a vector type.

IsPrimitive

Returns true if the argument is a primitive type. That is:

IsPrimitive(T) == IsInteger(T) or IsFloat(T)

IsFcnArgType

Returns true if the argument is a primitive type or a vector type. Further, if it is an integer type, it must be i32 or i64. That is:

IsFcnArgType(T) = (IsInteger(T) and (i32 = BitSizeOf(T)
                                     or i64 == BitSizeOf(T)))
                  or IsFloat(T) or IsVector(T)

Abbreviations

Abbreviations are used to convert PNaCl records to a sequence of bits. PNaCl uses the same strategy as LLVM’s bitcode file format. See that document for more details.

It should be noted that we replace LLVM’s header (called the Bitcode Wrapper Format) with the bytes of the PNaCl record header. In addition, PNaCl bitcode files do not allow blob abbreviation.

Abbreviations Block

The abbreviations block is the first block in the module build. The block is divided into sections. Each section is a sequence of records. Each record in the sequence defines a user-defined abbreviation. Each section defines abbreviations that can be applied to all (succeeding) blocks of a particular kind. These abbreviations are denoted by the (global) ID of the form @aN.

In terms of LLVM’s bitcode file format, the abbreviations block is called a BLOCKINFO block. Records SETBID and DEFINE_ABBREV are the only records allowed in PNaCl’s abbreviation block (i.e. it doesn’t allow BLOCKNAME and SETRECORDNAME records).

TODO

Extend this document to describe PNaCl’s bitcode bit sequencer without requiring the reader to refer to LLVM’s bitcode file format.

Improve article

This site uses cookies to deliver and enhance the quality of its services and to analyze traffic. If you agree, cookies are also used to serve advertising and to personalize the content and advertisements that you see. Learn more about our use of cookies.