PNaCl Bitcode Reference Manual

Warning

Deprecation of the technologies described here has been announced for platforms other than ChromeOS.

Please visit our migration guide for details.


Introduction

This document is a reference manual for the PNaCl bitcode format. It describes the bitcode on a semantic level; the physical encoding level will be described elsewhere. For the purpose of this document, the textual form of LLVM IR is used to describe instructions and other bitcode constructs.

Since the PNaCl bitcode is based to a large extent on LLVM IR as of version 3.3, many sections in this document point to a relevant section of the LLVM language reference manual. Only the changes, restrictions and variations specific to PNaCl are described—full semantic descriptions are not duplicated from the LLVM reference manual.

High Level Structure

A PNaCl portable executable (pexe in short) is a single LLVM IR module.

Data Model

The data model for PNaCl bitcode is fixed at little-endian ILP32: pointers are 32 bits in size. 64-bit integer types are also supported natively via the i64 type (for example, a front-end can generate these from the C/C++ type long long).

Floating point support is fixed at IEEE 754 32-bit and 64-bit values (f32 and f64, respectively).

Linkage Types

LLVM LangRef: Linkage Types

The linkage types supported by PNaCl bitcode are internal and external. A single function in the pexe, named _start, has the linkage type external. All the other functions and globals have the linkage type internal.

Calling Conventions

LLVM LangRef: Calling Conventions

The only calling convention supported by PNaCl bitcode is ccc - the C calling convention.

Visibility Styles

LLVM LangRef: Visibility Styles

PNaCl bitcode does not support visibility styles.

Global Variables

LLVM LangRef: Global Variables

Restrictions on global variables:

  • PNaCl bitcode does not support LLVM IR TLS models. See Threading for more details.
  • Restrictions on linkage types.
  • The addrspace, section, unnamed_addr and externally_initialized attributes are not supported.

Every global variable must have an initializer. Each initializer must be either a SimpleElement or a CompoundElement, defined as follows.

A SimpleElement is one of the following:

  1. An i8 array literal or zeroinitializer:
   [SIZE x i8] c"DATA"
   [SIZE x i8] zeroinitializer
  1. A reference to a GlobalValue (a function or global variable) with an optional 32-bit byte offset added to it (the addend, which may be negative):
   ptrtoint (TYPE* @GLOBAL to i32)
   add (i32 ptrtoint (TYPE* @GLOBAL to i32), i32 ADDEND)

A CompoundElement is a unnamed, packed struct containing more than one SimpleElement.

Functions

LLVM LangRef: Functions

The restrictions on linkage types, calling conventions and visibility styles apply to functions. In addition, the following are not supported for functions:

  • Function attributes (either for the the function itself, its parameters or its return type).
  • Garbage collector name (gc).
  • Functions with a variable number of arguments (vararg).
  • Alignment (align).

Aliases

LLVM LangRef: Aliases

PNaCl bitcode does not support aliases.

Named Metadata

LLVM LangRef: Named Metadata

While PNaCl bitcode has provisions for debugging metadata, it is not considered part of the stable ABI. It exists for tool support and should not appear in distributed pexes.

Other kinds of LLVM metadata are not supported.

Module-Level Inline Assembly

LLVM LangRef: Module-Level Inline Assembly

PNaCl bitcode does not support inline assembly.

Volatile Memory Accesses

LLVM LangRef: Volatile Memory Accesses

PNaCl bitcode does not support volatile memory accesses. The volatile attribute on loads and stores is not supported. See the PNaCl C/C++ Language Support for more details.

Memory Model for Concurrent Operations

LLVM LangRef: Memory Model for Concurrent Operations

See the PNaCl C/C++ Language Support for details.

Fast-Math Flags

LLVM LangRef: Fast-Math Flags

Fast-math mode is not currently supported by the PNaCl bitcode.

Type System

LLVM LangRef: Type System

The LLVM types allowed in PNaCl bitcode are restricted, as follows:

Scalar types

  • The only scalar types allowed are integer, float (32-bit floating point), double (64-bit floating point) and void.

    • The only integer sizes allowed are i1, i8, i16, i32 and i64.
    • The only integer sizes allowed for function arguments and function return values are i32 and i64.

Vector types

The only vector types allowed are:

  • 128-bit vectors integers of elements size i8, i16, i32.
  • 128-bit vectors of float elements.
  • Vectors of i1 type with element counts corresponding to the allowed element counts listed previously (their width is therefore not 128-bits).

Array and struct types

Array and struct types are only allowed in global variable initializers.

Pointer types

Only the following pointer types are allowed:

  • Pointers to valid PNaCl bitcode scalar types, as specified above, except for i1.
  • Pointers to valid PNaCl bitcode vector types, as specified above, except for <? x i1>.
  • Pointers to functions.

In addition, the address space for all pointers must be 0.

A pointer is inherent when it represents the return value of an alloca instruction, or is an address of a global value.

A pointer is normalized if it’s either:

  • inherent
  • Is the return value of a bitcast instruction.
  • Is the return value of a inttoptr instruction.

Undefined Values

LLVM LangRef: Undefined Values

undef is only allowed within functions, not in global variable initializers.

Constant Expressions

LLVM LangRef: Constant Expressions

Constant expressions are only allowed in global variable initializers.

Other Values

Metadata Nodes and Metadata Strings

LLVM LangRef: Metadata Nodes and Metadata Strings

While PNaCl bitcode has provisions for debugging metadata, it is not considered part of the stable ABI. It exists for tool support and should not appear in distributed pexes.

Other kinds of LLVM metadata are not supported.

Intrinsic Global Variables

LLVM LangRef: Intrinsic Global Variables

PNaCl bitcode does not support intrinsic global variables.

Errno and errors in arithmetic instructions

Some arithmetic instructions and intrinsics have the similar semantics to libc math functions, but differ in the treatment of errno. While the libc functions may set errno for domain errors, the instructions and intrinsics do not. This is because the variable errno is not special and is not required to be part of the program.

Instruction Reference

List of allowed instructions

This is a list of LLVM instructions supported by PNaCl bitcode. Where applicable, PNaCl-specific restrictions are provided.

The following attributes are disallowed for all instructions:

  • nsw and nuw
  • exact

Only the LLVM instructions listed here are supported by PNaCl bitcode.

  • ret
  • br
  • switch

    i1 values are disallowed for switch.

  • add, sub, mul, shl, udiv, sdiv, urem, srem, lshr, ashr

    These arithmetic operations are disallowed on values of type i1.

    Integer division (udiv, sdiv, urem, srem) by zero is guaranteed to trap in PNaCl bitcode.

  • and
  • or
  • xor
  • fadd
  • fsub
  • fmul
  • fdiv
  • frem

    The frem instruction has the semantics of the libc fmod function for computing the floating point remainder. If the numerator is infinity, or denominator is zero, or either are NaN, then the result is NaN. Unlike the libc fmod function, this does not set errno when the result is NaN (see the instructions and errno section).

  • alloca

    See alloca instructions.

  • load, store

    The pointer argument of these instructions must be a normalized pointer (see pointer types). The volatile and atomic attributes are not supported. Loads and stores of the type i1 and <? x i1> are not supported.

    These instructions must follow the following alignment restrictions:

    • On integer memory accesses: align 1.
    • On float memory accesses: align 1 or align 4.
    • On double memory accesses: align 1 or align 8.
    • On vector memory accesses: alignment at the vector’s element width, for example <4 x i32> must be align 4.
  • trunc
  • zext
  • sext
  • fptrunc
  • fpext
  • fptoui
  • fptosi
  • uitofp
  • sitofp
  • ptrtoint

    The pointer argument of a ptrtoint instruction must be a normalized pointer (see pointer types) and the integer argument must be an i32.

  • inttoptr

    The integer argument of a inttoptr instruction must be an i32.

  • bitcast

    The pointer argument of a bitcast instruction must be a inherent pointer (see pointer types).

  • icmp
  • fcmp
  • phi
  • select
  • call
  • unreachable
  • insertelement
  • extractelement

alloca

The only allowed type for alloca instructions in PNaCl bitcode is i8. The size argument must be an i32. For example:

  %buf = alloca i8, i32 8, align 4

Intrinsic Functions

LLVM LangRef: Intrinsic Functions

List of allowed intrinsics

The only intrinsics supported by PNaCl bitcode are the following.

  • llvm.memcpy
  • llvm.memmove
  • llvm.memset

    These intrinsics are only supported with an i32 len argument.

  • llvm.bswap

    The overloaded llvm.bswap intrinsic is only supported with the following argument types: i16, i32, i64 (the types supported by C-style GCC builtins).

  • llvm.ctlz
  • llvm.cttz
  • llvm.ctpop

    The overloaded llvm.ctlz, llvm.cttz, and llvm.ctpop intrinsics are only supported with the i32 and i64 argument types (the types supported by C-style GCC builtins).

  • llvm.fabs

    The overloaded llvm.fabs intrinsic is supported for float, double and <4 x float> argument types. It returns the absolute value of the argument. Some notable points: it returns +0.0 when given -0.0, +inf when given -inf, and a positive NaN when given any signed NaN.

    NOTE: This intrinsic was introduced in the pepper_42 SDK.

  • llvm.sqrt

    The overloaded llvm.sqrt intrinsic is only supported for float and double arguments types. This has the same semantics as the libc sqrt function, returning NaN for values less than -0.0. However, this does not set errno when the result is NaN (see the instructions and errno section).

  • llvm.stacksave
  • llvm.stackrestore

    These intrinsics are used to implement language features like scoped automatic variable sized arrays in C99. llvm.stacksave returns a value that represents the current state of the stack. This value may only be used as the argument to llvm.stackrestore, which restores the stack to the given state.

  • llvm.trap

    This intrinsic is lowered to a target dependent trap instruction, which aborts execution.

  • llvm.nacl.read.tp

    See thread pointer related intrinsics.

  • llvm.nacl.longjmp
  • llvm.nacl.setjmp

    See Setjmp and Longjmp.

  • llvm.nacl.atomic.store
  • llvm.nacl.atomic.load
  • llvm.nacl.atomic.rmw
  • llvm.nacl.atomic.cmpxchg
  • llvm.nacl.atomic.fence
  • llvm.nacl.atomic.fence.all
  • llvm.nacl.atomic.is.lock.free

    See atomic intrinsics.

  declare i8* @llvm.nacl.read.tp()

Returns a read-only thread pointer. The value is controlled by the embedding sandbox’s runtime.

Setjmp and Longjmp

  declare void @llvm.nacl.longjmp(i8* %jmpbuf, i32)
  declare i32 @llvm.nacl.setjmp(i8* %jmpbuf)

These intrinsics implement the semantics of C11 setjmp and longjmp. The jmpbuf pointer must be 64-bit aligned and point to at least 1024 bytes of allocated memory.

Atomic intrinsics

  declare iN @llvm.nacl.atomic.load.<size>(
          iN* <source>, i32 <memory_order>)
  declare void @llvm.nacl.atomic.store.<size>(
          iN <operand>, iN* <destination>, i32 <memory_order>)
  declare iN @llvm.nacl.atomic.rmw.<size>(
          i32 <computation>, iN* <object>, iN <operand>, i32 <memory_order>)
  declare iN @llvm.nacl.atomic.cmpxchg.<size>(
          iN* <object>, iN <expected>, iN <desired>,
          i32 <memory_order_success>, i32 <memory_order_failure>)
  declare void @llvm.nacl.atomic.fence(i32 <memory_order>)
  declare void @llvm.nacl.atomic.fence.all()

Each of these intrinsics is overloaded on the iN argument, which is reflected through <size> in the overload’s name. Integral types of 8, 16, 32 and 64-bit width are supported for these arguments.

The @llvm.nacl.atomic.rmw intrinsic implements the following read-modify-write operations, from the general and arithmetic sections of the C11/C++11 standards:

  • add
  • sub
  • or
  • and
  • xor
  • exchange

For all of these read-modify-write operations, the returned value is that at object before the computation. The computation argument must be a compile-time constant.

All atomic intrinsics also support C11/C++11 memory orderings, which must be compile-time constants.

Integer values for these computations and memory orderings are defined in "llvm/IR/NaClAtomicIntrinsics.h".

The @llvm.nacl.atomic.fence.all intrinsic is equivalent to the @llvm.nacl.atomic.fence intrinsic with sequentially consistent ordering and compiler barriers preventing most non-atomic memory accesses from reordering around it.

  declare i1 @llvm.nacl.atomic.is.lock.free(i32 <byte_size>, i8* <address>)

The llvm.nacl.atomic.is.lock.free intrinsic is designed to determine at translation time whether atomic operations of a certain byte_size (a compile-time constant), at a particular address, are lock-free or not. This reflects the C11 atomic_is_lock_free function from header <stdatomic.h> and the C++11 is_lock_free member function in header <atomic>. It can be used through the __nacl_atomic_is_lock_free builtin.

Improve article

This site uses cookies to deliver and enhance the quality of its services and to analyze traffic. If you agree, cookies are also used to serve advertising and to personalize the content and advertisements that you see. Learn more about our use of cookies.